View source for Using your Power over Ethernet (PoE) Adapter

*You can purchase them [http://www.amazon.com/AIR802-POEPASS-01-Injector-Splitter-Connector/dp/B003DLJNWE here].

==Question==

'''How do I set up my AirSight camera with my X10 Power over Ethernet (PoE) adapter?'''

==Answer==

*Make sure your Ethernet cable is 100 feet or shorter.

*Plug the power supply into wall power near your router or switch.

*Connect the Ethernet cable and power supply to the PoE adapter with the barrel jack (the "injector" adapter.)

*Plug that PoE adapter into a LAN port on your router.

*Plug the other PoE adapter with the silver plug (the "splitter" adapter) into the power port and Ethernet port on the camera.

*Connect the other end of the Ethernet cable to the "splitter" adapter.


[[Image:POE_breakout.jpg]]

[[category: Configuration]]
[[category: Frequently asked questions]]
[[category: Hardware]]
[[category: Product Information]]
[[category: Software]]