Difference between revisions of "SS13A"
Jump to navigation
Jump to search
X10douglas (talk | contribs) |
X10douglas (talk | contribs) |
||
| Line 1: | Line 1: | ||
| − | == | + | =='''X10 SS13A and PRO PHW04D: SlimLine Wireless Wall Switch Transmitter'''== |
| − | ''' | + | |
| − | [[Image:SS13A.jpg|thumb]] | + | |
| − | == | + | [[Image:Example.jpg]][[Image:SS13A.jpg|thumb]] |
| + | |||
| + | |||
| + | |||
| + | ==Product Pages== | ||
| + | |||
| + | *[http://www.authinx.com/manuals/X10/AM466.pdf Detailed AM466 Instructions] | ||
| + | *[http://www.authinx.com/manuals/X10/PAM01-PAM02.pdf Detailed PAM02 Instructions] | ||
| + | *[http://www.x10.com/am446-lamp-module.html Purchase AM466] | ||
| + | *[http://www.x10.com/pam02-3-pin-grounded-appliance-module-with-ag.html Purchase PAM02] | ||
| + | |||
| + | |||
| + | |||
| + | ==Specifications== | ||
;Weight: 0.2 lbs. | ;Weight: 0.2 lbs. | ||
;FCC ID: B4SSS13A | ;FCC ID: B4SSS13A | ||
;Power Supply: (1) CR2032, 3V lithium battery | ;Power Supply: (1) CR2032, 3V lithium battery | ||
| − | '''To change the Housecode''' | + | |
| + | |||
| + | ==Programming Instructions== | ||
| + | |||
| + | *'''To change the Housecode''' | ||
*Press and hold the first (top) ON rocker key. The red LED blinks once. 3 seconds later, the LED blinks the current setting: 1 blink for Housecode A, 2 blinks for B..... 16 blinks for P. | *Press and hold the first (top) ON rocker key. The red LED blinks once. 3 seconds later, the LED blinks the current setting: 1 blink for Housecode A, 2 blinks for B..... 16 blinks for P. | ||
*Release the first (top) ON rocker key. | *Release the first (top) ON rocker key. | ||
*Press and release the first (top) ON rocker key the appropriate number of times for the House Code you want to set. Once for A, twice for B, etc. The LED blinks for each press. | *Press and release the first (top) ON rocker key the appropriate number of times for the House Code you want to set. Once for A, twice for B, etc. The LED blinks for each press. | ||
*Hold the button on your last press. 3 seconds later, the red LED blinks back the new setting, e.g. 3 blinks for Housecode C. If you do not follow this programming sequence, the LED will stay on for 1 second and your existing setting will not be changed. | *Hold the button on your last press. 3 seconds later, the red LED blinks back the new setting, e.g. 3 blinks for Housecode C. If you do not follow this programming sequence, the LED will stay on for 1 second and your existing setting will not be changed. | ||
| − | '''To change the Unit Code ''' | + | |
| + | |||
| + | *'''To change the Unit Code ''' | ||
*The second and third rockers are always one # higher than the first. For example, if you set the first rocker key to 6, the second rocker key controls 7, and the third controls 8. | *The second and third rockers are always one # higher than the first. For example, if you set the first rocker key to 6, the second rocker key controls 7, and the third controls 8. | ||
| Line 19: | Line 38: | ||
*Press and release the top OFF rocker key the appropriate number of times for the Unit Code you want. IMPORTANT: Hold the key on your last press. 3 seconds later the new code blinks back. If you do not follow this programming sequence, the LED will stay on for 1 second and your existing setting will not be changed. | *Press and release the top OFF rocker key the appropriate number of times for the Unit Code you want. IMPORTANT: Hold the key on your last press. 3 seconds later the new code blinks back. If you do not follow this programming sequence, the LED will stay on for 1 second and your existing setting will not be changed. | ||
| − | [[ | + | |
| + | |||
| + | [[category: Configuration]] | ||
| + | [[category: Hardware]] | ||
| + | [[category: Product Information]] | ||
| + | [[category: Specifications]] | ||
Revision as of 21:48, 1 May 2014
X10 SS13A and PRO PHW04D: SlimLine Wireless Wall Switch Transmitter
Product Pages
Specifications
- Weight
- 0.2 lbs.
- FCC ID
- B4SSS13A
- Power Supply
- (1) CR2032, 3V lithium battery
Programming Instructions
- To change the Housecode
- Press and hold the first (top) ON rocker key. The red LED blinks once. 3 seconds later, the LED blinks the current setting: 1 blink for Housecode A, 2 blinks for B..... 16 blinks for P.
- Release the first (top) ON rocker key.
- Press and release the first (top) ON rocker key the appropriate number of times for the House Code you want to set. Once for A, twice for B, etc. The LED blinks for each press.
- Hold the button on your last press. 3 seconds later, the red LED blinks back the new setting, e.g. 3 blinks for Housecode C. If you do not follow this programming sequence, the LED will stay on for 1 second and your existing setting will not be changed.
- To change the Unit Code
- The second and third rockers are always one # higher than the first. For example, if you set the first rocker key to 6, the second rocker key controls 7, and the third controls 8.
- Press and hold the top OFF rocker key . The red LED blinks once. 3 seconds later, the LED blinks the current setting: 1 blink for Unit Code 1, 2 blinks for 2, 16 blinks for 16.
- Release the top OFF rocker key.
- Press and release the top OFF rocker key the appropriate number of times for the Unit Code you want. IMPORTANT: Hold the key on your last press. 3 seconds later the new code blinks back. If you do not follow this programming sequence, the LED will stay on for 1 second and your existing setting will not be changed.