Difference between revisions of "PAO11"
Jump to navigation
Jump to search
X10douglas (talk | contribs) |
X10douglas (talk | contribs) |
||
| Line 18: | Line 18: | ||
;Minimum Load: 40W: ''Lamps/Loads rated below 40W may flicker and/or operate erratically.'' | ;Minimum Load: 40W: ''Lamps/Loads rated below 40W may flicker and/or operate erratically.'' | ||
;Rating: 15A, 1800W | ;Rating: 15A, 1800W | ||
| + | |||
| + | |||
| + | |||
| + | ;Operating Environment: Indoors | ||
| + | ;Operating Temperature Range: 32deg to 104deg F (0deg to 40deg C) | ||
| + | ;Operating Humidity Range: 0-90% Relative Humidity | ||
| + | ;Storage Temperature Range: -4deg to 158deg F (-20deg to 70deg C) | ||
Latest revision as of 19:10, 27 August 2015
X10 SR227 and PRO PAO11: Half-Switched SuperSocket Wall Receptacle Module
Product Pages
Specifications
- Weight
- 0.44 lbs.
- Power Supply
- 120VAC @ 60Hz
- Minimum Load
- 40W: Lamps/Loads rated below 40W may flicker and/or operate erratically.
- Rating
- 15A, 1800W
- Operating Environment
- Indoors
- Operating Temperature Range
- 32deg to 104deg F (0deg to 40deg C)
- Operating Humidity Range
- 0-90% Relative Humidity
- Storage Temperature Range
- -4deg to 158deg F (-20deg to 70deg C)
Related Articles
Questions
Why do some modules work in some outlets and not in others?
Why do some modules sometimes turn on and off by themselves?
Modules can be turned off but not turned on from the X10 powerline signal. What might cause this?
Why does my Appliance Module turn on but not off?
Why does my Appliance Module turn on immediately after being turned off?
Since there are 256 possible addresses, am I limited to 256 controlled devices?
How do I know if I the module I have selected has enough power?