Difference between revisions of "Adding A Switch To A Door Sensor"
(→Answer) |
|||
| Line 1: | Line 1: | ||
===Question=== | ===Question=== | ||
I have a double window or door; do I need to use two Door/Window Sensors? | I have a double window or door; do I need to use two Door/Window Sensors? | ||
| + | |||
How can I add an extra magnet switch to a Door/Window Sensor? | How can I add an extra magnet switch to a Door/Window Sensor? | ||
| + | |||
===Answer=== | ===Answer=== | ||
It is pretty simple to add another magnet switch to a Door/Window Sensor. The magnet switch has two screw terminals on it. Normally, one magnet switch is wired to the terminals. Whenever the switch opens up or a wire is cut, the sensor sounds the alarm because power is not flowing between the terminals. | It is pretty simple to add another magnet switch to a Door/Window Sensor. The magnet switch has two screw terminals on it. Normally, one magnet switch is wired to the terminals. Whenever the switch opens up or a wire is cut, the sensor sounds the alarm because power is not flowing between the terminals. | ||
Revision as of 21:10, 29 June 2006
Question
I have a double window or door; do I need to use two Door/Window Sensors?
How can I add an extra magnet switch to a Door/Window Sensor?
Answer
It is pretty simple to add another magnet switch to a Door/Window Sensor. The magnet switch has two screw terminals on it. Normally, one magnet switch is wired to the terminals. Whenever the switch opens up or a wire is cut, the sensor sounds the alarm because power is not flowing between the terminals.
To add a switch to a sensor, unscrew one of the two terminals and take the sensor wire out. Get a length of wire; attach it to the free screw terminal, then attach the other end to a screw terminal on the new magnet switch. Connect the free wire from the sensor module to the other screw terminal on the new magnet switch. You now have a loop of wire with two switches in it. If either switch is tripped, the alarm will go off.
You can call 800-675-3044 to purchase extra magnet switches. You can also substitute any normally-closed sensor (NC) made for a wired security system.
