Difference between revisions of "Newer WS467s and Preset Dim"

Latest revision as of 21:44, 17 September 2008

Redirect to:

@@ Line 1: / Line 1: @@
-==Question==
+#REDIRECT [[Newer Wall Switches and Preset Dim]]
-'''I bought a WS467 wall switch in 2007 or later and its manual does not seem to describe its behavior correctly. Do you have updated instructions? '''
-==Answer==
-WS467s manufactured in 2007 or later have [[SoftStart]] and Preset Dim features added. By default, tapping the switch on the WS467 will bring the switch on at full brightness. You can set the switch to come on at a dim level instead.
-===Setting Preset Dim===
-Tap the switch on the WS467 so it comes on at full brightness. Press and hold the switch; the light will dim. Release the switch at the desired level. Tapping the switch will now alternate between off and dimmed.
-===Clearing Preset Dim===
-If the light is off, tap the switch once so it is on but dimmed. Press and hold the switch for 5 seconds; the light will dim further until it is almost off. Release the switch, then press and hold it for five more seconds; the light should come on at full brightness.