Floodlights Do Not Turn Off

Questions Why do my floodlights turn on but do not turn off? Answer If the Motion Monitor is accidentally powered off (from a wall switch that controls the power to it or a loss of power) while the floodlights are on, they will stay on when power is reapplied. To reset the Outdoor Motion Monitor, follow the instructions below.

• Set RANGE control to MAX.
• Set DUSK control to LIGHT.
• Set TIME DELAY to 0.1.
• Set THIS UNIT switch to SENSOR.
• Turn off the power at the circuit breaker panel (in your breaker box). Wait 10 seconds.
• Turn power back on at the circuit breaker (the floodlights will be on just like they were before power was turned off). *Wait for 1 minute, and then walk in front of the Motion Detector.
• Make sure that it does not see any other movement for 10 seconds, and check that the floodlights turn off.
• Set RANGE, DUSK, and TIME DELAY controls as desired, following the instructions in the owner's manual. Your Motion Detector Light Control is now ready to use. NOTE: When you first apply power to the Motion Detector, it will not start working until after a delay of 1 minute.

Related Articles [a href="/kbase/articles/a00231.html"]a00231[/a] : Dual Floodlight Motion Detector Set-Up[BR] Key Topics: flood,instructions,set,up,light,dual Relates to: PR511 [a href="/kbase/articles/ a00084.html"] a00084[/a] : [BR] Key Topics: Relates to: [a href="/kbase/articles/ a00087.html"] a00087[/a] : [BR] Key Topics: Relates to: [img src="http://site.x10.com/?Z3gxT2tiYXNlYXJ0aWNsZTEuZGF0=RND%7Ckbasearticle"]