Resetting the iconRemote

From X10Wiki
Revision as of 20:22, 22 March 2007 by Ericb (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Questions

How do I clear out my iconRemote's memory and start over again?

How do I run the iconRemote's Intro Wizard again?

Answer

Press the Home key, then press Setup, then press Clear Settings, then press Master Clear, then press Clear again. Please note that this will, of course, erase everything you have set up in the remote. After performing this reset procedure the Intro Wizard will appear. You can exit the Wizard at any time by pressing the Home button (located just below the screen). Follow the instructions on the Wizard screens to familiarize yourself with the OK, Back, and Side Keys. You can go back and forth through the Wizard but once you leave it and move on to setting up devices you won't see the Wizard again unless you perform this reset procedure.

Retrieved from "https://kbase.x10.com/index.php?title=Resetting_the_iconRemote&oldid=4939"