PR511 Floodlights Do Not Turn Off

Question

I can't turn off the lights on my Motion Monitor. What should I do?

Answer

If turned on by a command from an X10 Controller, the Motion Monitor stays on until turned off from an X10 Controller. If necessary, send an Off command to the Motion Monitor from an X10 controller, returning the Motion Monitor to normal cycling mode.

Also, if the Motion Monitor is accidentally powered off (from a wall switch that controls the power to it) while the floodlights are on, it will stay on when the power is reapplied. After dark, (depending on the position of the dusk setting) trigger the Motion Monitor by walking in front of it, then after the delay time you’ve set the floodlights will turn off and return to normal operation. ===Related Articles===