Difference between revisions of "Adding A Switch To A Door Sensor"

From X10Wiki
Jump to navigation Jump to search
Line 3: Line 3:
 
How can I add an extra magnet switch to a Door/Window Sensor?
 
How can I add an extra magnet switch to a Door/Window Sensor?
 
===Answer===
 
===Answer===
It is pretty simple to add another magnet switch to a Door/Window Sensor. The sensor itself has two screw terminals on it. Normally, one magnet switch is wired to the terminals. Whenever the switch opens up or a wire is cut, the sensor sounds the alarm because power is not flowing between the terminals.  
+
It is pretty simple to add another magnet switch to a Door/Window Sensor. The magnet switch has two screw terminals on it. Normally, one magnet switch is wired to the terminals. Whenever the switch opens up or a wire is cut, the sensor sounds the alarm because power is not flowing between the terminals.  
  
To add a switch to a sensor, unscrew one of the two terminals and take the switch wire out. Attach the free end of the old switch wire to one of the two new switch wires. Attach the other new switch wire to the screw terminal. You now have a loop of wire with two switches in it. If either switch is tripped, the alarm will go off.  
+
To add a switch to a sensor, unscrew one of the two terminals and take the sensor wire out. Get a length of wire; attach it to the free screw terminal, then attach the other end to a screw terminal on the new magnet switch. Connect the free wire from the sensor module to the other screw terminal on the new magnet switch. You now have a loop of wire with two switches in it. If either switch is tripped, the alarm will go off.  
  
 
You can call 800-675-3044 to purchase extra magnet switches. You can also substitute any normally-closed sensor (NC) made for a wired security system.
 
You can call 800-675-3044 to purchase extra magnet switches. You can also substitute any normally-closed sensor (NC) made for a wired security system.
 +
 +
[[Image:dwmag.jpg]]

Revision as of 21:10, 29 June 2006

Question

I have a double window or door; do I need to use two Door/Window Sensors? How can I add an extra magnet switch to a Door/Window Sensor?

Answer

It is pretty simple to add another magnet switch to a Door/Window Sensor. The magnet switch has two screw terminals on it. Normally, one magnet switch is wired to the terminals. Whenever the switch opens up or a wire is cut, the sensor sounds the alarm because power is not flowing between the terminals.

To add a switch to a sensor, unscrew one of the two terminals and take the sensor wire out. Get a length of wire; attach it to the free screw terminal, then attach the other end to a screw terminal on the new magnet switch. Connect the free wire from the sensor module to the other screw terminal on the new magnet switch. You now have a loop of wire with two switches in it. If either switch is tripped, the alarm will go off.

You can call 800-675-3044 to purchase extra magnet switches. You can also substitute any normally-closed sensor (NC) made for a wired security system.

Dwmag.jpg