Difference between revisions of "Advanced Functions in Macros"

From X10Wiki
Jump to: navigation, search
(Windows Command (PC and MyHouse required))
m
Line 14: Line 14:
 
This function lets you issue an X10 address over the powerline, but without any ON or OFF command after it. We know of no uses for this command.
 
This function lets you issue an X10 address over the powerline, but without any ON or OFF command after it. We know of no uses for this command.
  
===Windows Command (PC and MyHouse required) ===
+
===Windows Command===
 
+
* This command requires that you have MyHouse Online and leave the CM15A attached to your runnning PC.
 
This lets you run any program on your PC that you could run from the command line (Start->Run...). If you need to append conditionals (like dir -od) you will need to build a [http://en.wikipedia.org/wiki/Batch_file batch file] then run that from your macro. Here is how to make a batch file that [http://www.computerhope.com/issues/ch001041.htm plays a MP3].
 
This lets you run any program on your PC that you could run from the command line (Start->Run...). If you need to append conditionals (like dir -od) you will need to build a [http://en.wikipedia.org/wiki/Batch_file batch file] then run that from your macro. Here is how to make a batch file that [http://www.computerhope.com/issues/ch001041.htm plays a MP3].
  
Line 27: Line 27:
 
This lets you issue an arbitrary ON/OFF command to some module without having to define it elsewhere in the software.  
 
This lets you issue an arbitrary ON/OFF command to some module without having to define it elsewhere in the software.  
  
===Email Notification (PC and MyHouse required) ===
+
===Email Notification===
 +
* This command requires that you have MyHouse Online and leave the CM15A attached to your runnning PC.
 
Self-explanatory; lets you have MyHouse send a predefined email.
 
Self-explanatory; lets you have MyHouse send a predefined email.
  
===Network Access (PC and MyHouse required) ===
+
===Network Access===
 +
* This command requires that you have MyHouse Online and leave the CM15A attached to your runnning PC.
 
Lets you connect or disconnect from the MyHouse Online server.
 
Lets you connect or disconnect from the MyHouse Online server.
  
===Dialup Service (PC and MyHouse required) ===
+
===Dialup Service===
 +
* This command requires that you have MyHouse Online and leave the CM15A attached to your runnning PC.
 
If you have a modem, this will make it dial out or hang up.
 
If you have a modem, this will make it dial out or hang up.

Revision as of 20:53, 9 March 2010

Question

What do the various items listed under Advanced Functions in the Macro Designer do?

Answer

Make sure you click here to locate Advanced Functions:

Thisbit.JPG

Some advanced functions require that you have MyHouse Online; those are noted below.

X10 Address Command

This function lets you issue an X10 address over the powerline, but without any ON or OFF command after it. We know of no uses for this command.

Windows Command

  • This command requires that you have MyHouse Online and leave the CM15A attached to your runnning PC.

This lets you run any program on your PC that you could run from the command line (Start->Run...). If you need to append conditionals (like dir -od) you will need to build a batch file then run that from your macro. Here is how to make a batch file that plays a MP3.

Extended Code

This lets you use the X10 Extended Code protocol, detailed here. Unless you are developing your own X10-compatible devices this is likely to be of little use. X10 does not provide any other support or documentation for use of this Extended Code command in macros.

Module Control

This lets you issue an arbitrary BRIGHT/DIM/ON/OFF command to some module without having to define it elsewhere in the software.

Appliance Control

This lets you issue an arbitrary ON/OFF command to some module without having to define it elsewhere in the software.

Email Notification

  • This command requires that you have MyHouse Online and leave the CM15A attached to your runnning PC.

Self-explanatory; lets you have MyHouse send a predefined email.

Network Access

  • This command requires that you have MyHouse Online and leave the CM15A attached to your runnning PC.

Lets you connect or disconnect from the MyHouse Online server.

Dialup Service

  • This command requires that you have MyHouse Online and leave the CM15A attached to your runnning PC.

If you have a modem, this will make it dial out or hang up.