AirSight App Features

From X10Wiki
Revision as of 00:33, 6 February 2015 by X10douglas (talk | contribs)
Jump to navigation Jump to search

Here is a simple guide that will walk you through the features available in the AirSight App

NewAppLogo.JPG


Getting to know the AirSight app

Upon running the app for the first time you will be presented with a blank CAMERA LIST

EMPTY.png


Use the icons along the bottom of the screen to navigate between the different tabs



CAMERA Tab

After you've added your cameras to the app - you will return the ADD CAMERA tab to see your list of cameras as well as their status

TheNewCameraList.png


Use the EDIT button to delete cameras from your list

DELETE.png


The SEARCH BAR can be used to quickly locate a specific camera in your list

SEARCH.png


To edit the settings for the camera tap the SETTINGS ARROW to the right of the camera name to access the EDIT CAMERA MENU

TheNewCameraListArrow.png


  • EDITCAMERAMENU

Will insert comments about these menus after images have been added

  • ADVANCEDSETTINGSALL



EVENT Tab

If MOTION DETECTION has been turned on in the ADVANCED SETTING MENU the app keeps record of each event in the EVENTS tab

NewEvents.png


To access the list of events for each camera tap the ARROW to the right of the camera name to access it's EVENT LIST

NewEventsArrow.png NewEventList.png


Use the SEARCH button to quickly navigate to a specific event based on when the event occurred

EventListSearch.png


  • Note: Events cannot be deleted from the app - the only way to remove them from your phone is to delete the app.



LOCALRECORD Tab

Use the LOCALRECORD tab to access your VIDEO and SNAPSHOTS

  • LOCALRECORDTAB


Use the VIDEO and SNAPSHOT tabs at the top of the screen to navigate between them


Tap the ARROW to the right of the camera's name to access the PHOTO or VIDEO menu

NewCameraPhotos.png


Tap the PHOTO or VIDEO to view

NewPhotoView.png


Use the DELETE and SAVE icons to discard or save to your PHOTOS folder on your phone.

NewPhotoViewIcons.png


If this is the first time saving PHOTOS or VIDEO tap OK when prompted

NewAccessPhotoOk.png


The app will notify you the image was saved successfully - tap OK to return to your list of photos or videos

NewSaveToAlbum.png



ADD CAMERA Tab

If MOTION DETECTION has been turned on in the ADVANCED SETTING MENU the app keeps record of each event in the EVENTS tab

TheNewAddCamera.png RefreshAddCamera.png TNACM.png NewManualAddCamera.png TheNewAddCameraMenu.png QRADD.png

  • QRSCANMENU



INFO Tab

If MOTION DETECTION has been turned on in the ADVANCED SETTING MENU the app keeps record of each event in the EVENTS tab

TheNewInfoTab.png



Live View

While your phone is in vertical orientation you can access all of the features available for your camera by clicking on the small icons located along the bottom of the screen:

F LiveView.png


  • Record Video
  • Take a Snapshot
  • Listen and Talk with Two-Way Audio: (XX60A PTZ requires external mic and speaker -not included)
  • Set Preset Position
  • Call Preset Position


While the phone is in horizontal orientation you can access:

  • Record Video
  • Take a Snapshot
  • Listen and Talk with Two-Way Audio: (XX60A PTZ requires external mic and speaker -not included)

F RotateNew.png



If your camera model has the ability to zoom - you will notice additional buttons added: F Zoom.png

To zoom your camera in and out you can either pinch/spread the image with your fingers or use the


Zoom In F ZoomI.png and Zoom Out F ZoomO.png icons.


Record Video

To record live video simply tap the video camera icon to access the RECORD CONTROL menu

F MotionRecord.png

From the RECORD CONTROL menu you can start and stop your recordings.

F RecordControl.png


Snapshots

To take snapshots simply tap the camera icon

F SnapShot.png

You will receive a message that a snapshot was successfully saved to your PHOTOS folder of your phone.

F SnapShotSaved.png


Listen and Talk with Two-Way Audio

Most of the AirSight IP camera models include an on-board microphone and speaker providing two-way audio communication.

F Audio.png

For AirSight IP camera models that do not (XX60A PTZ) an external microphone and speaker are required to utilize this feature.

Simply tap the speaker icon to access the AUDIO CONTROL menu

AudioControl.png


The audio status box will let you know what mode the camera is currently in: Mute, Listen, or Speak.

F AudioStatus.png


Presets

Most of the AirSight IP camera models can pan and tilt and some have the ability to zoom.

Use the preset feature to program up to 16 preset positions for your camera to quickly retrieve later.

F Preset.png


To program a preset position, pan/tilt/zoom to the desired location and tap the PRESET SAVE icon

F PresetSave.png

A numbered menu appears - tap a number to program that preset position

F PresetSaveChoose.png

To call that preset position - tap the PRESET icon

F PresetGo.png

A numbered menu appears - tap a number to call that preset position

Your camera will pan/tilt/zoom to the appointed position that you set.

F PresetGoChoose.png


Exit Live View

To exit the Live View menu simply tap the BACK button to return to your camera list to view other cameras.

F Back.png



Related Products