AirSight HD Phone App Setup

From X10Wiki
Revision as of 00:35, 11 April 2014 by X10douglas (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Software Installation

Download the FREE App (P2PCam264) from the Apple App store (or Google Play store).

Note: The iPhone/iPad App and Android mobile device setup are similar, this manual uses the iPhone/iPad App as an example.


Add camera

Option A: Add a camera via QR Code. This method makes setup extremely fast and easy.

Run the App and touch QR Code on the Add Camera screen (shown on the next page). The App will auto-open your phone’s camera.

Scan (i.e., take a photo of) the QR code in the bottom of the camera, the App will add the camera automatically. You then need to enter the password manually (default 000000, you can change this later), see Option C below. ). Touch “Save” to save the camera settings.


XX59ASETUPAPP1.PNG

Option B: Search for the camera: Touch the symbol show below to search for any camera located on the same LAN as your iPhone or mobile device. You then need to enter the password manually (default 000000, you can change this later), see Option C below. ). Touch “Save” to save the camera settings.

XX59ASETUPAPP2.PNG

Option C: Add a camera manually: You can touch “Add” to add the camera manually. Enter a name for the camera, the P2P User ID (found on the bottom of the camera), and the password (default 000000, you can change this later). Touch “Save” to save the camera settings. Note, you can add up to 4 cameras in the mobile App (more when using a browser).


File:XX59ASETUPAPP3.PNG

Connect Camera

Touch the Camera icon to connect to (view) the camera.

XX59ASETUPAPP4.PNG

Operate Camera

You can pan the image from left to right, and tilt up and down, by simply swiping your finger across or up and down the image on the screen; and zoom in and out by pinching your fingers.

You can take a snapshot, save the picture, and listen and talk with two-way audio:

XX59ASETUPAPP5.PNG Touch to take and save a snapshot.

XX59ASETUPAPP6.PNG Touch to see the saved snapshot.

XX59ASETUPAPP8.PNG Touch to listen to or speak through the camera.

XX59ASETUPAPP7.PNG

Listen: Touch to hear what happens near where the camera placed. Speak: Touch to speak through the camera. Mute: Touch to mute the audio. Dismiss: Touch to go back to the video screen.

Advance Settings:

XX59ASETUPAPP9.PNG

Security Code: Touch to change your password.

XX59ASETUPAPP10.PNG

Video Quality: Touch to change the video settings. This will be affected by your bandwidth, you can select from Max to Min according to your network conditions, to ensure smooth viewing of the camera.

XX59ASETUPAPP11.PNG

Video Flip: You can flip the image depending on how your camera is mounted. For example: if your camera is hung from the ceiling, you can choose “Vertical Flip”.

XX59ASETUPAPP12.PNG

Environment Mode: Choose a mode to adjust depending on where the camera is located. For example: if the camera is located indoors, choose “Indoor Mode (60Hz). If the camera is located outside the house, choose “Outdoor Mode”. This will ensure the camera has the best video quality.

XX59ASETUPAPP13.PNG

Motion Detection: Change the motion diction sensitivity level, or turn off motion detection.

XX59ASETUPAPP14.PNG

About Device: Check camera information here.

XX59ASETUPAPP15.PNG

4. Check motion detection record: If you touch “Event” you will see when motioned detection was triggered.

XX59ASETUPAPP16.PNG

XX59ASETUPAPP17.PNG

App. Info. Touch “Info.” to view the App version.

XX59ASETUPAPP18.PNG