Difference between revisions of "Alarm Input Armed / IO Linkage on Alarm"

From X10Wiki
Jump to: navigation, search
(Alarm Settings for Internet Explorer)
 
Line 63: Line 63:
  
 
[[Image:IOLINKAGE12.png]]
 
[[Image:IOLINKAGE12.png]]
 +
 +
 +
==IO Pins for IO Alarm Linkage==
 +
 +
[[Image:ALARMINPUT4.png]]
 +
 +
===I/O PINS:===
 +
 +
# '''Output'''
 +
# '''Output'''
 +
# '''Alarm Input'''
 +
# '''Input (GND)'''
 +
 +
 +
'''Output pins:''' Output pins (1 & 2) can be used to enable IO linkage on alarm.
 +
 +
* For example, you might connect an external siren to sound when motion is detected.
 +
 +
* You can also manually control the output switches via the WebUI buttons [[Image:ALARMINPUT5.png]] & [[Image:ALARMINPUT6.png]] to turn the connected device ON/OFF.
 +
 +
 +
 +
 +
'''Input pins:''' Input pins (3 & 4) can be used for 1-way external sensor input to the camera.
 +
 +
* For example, you might connect an external Passive Infrared (PIR) Sensor to it triggered the camera to send an e-mail and/or trigger the siren attached to the Output Pins (above).
 +
 +
* If you link an external alarm device to Pins 3 and 4, when '''Alarm Input Enable''' is selected, the external alarm is armed.
 +
 +
 +
 +
'''NOTE:''' All pins work as a switch only.
  
 
[[category: Configuration]]
 
[[category: Configuration]]

Latest revision as of 22:09, 9 February 2015

Question

How do I setup my Airsight Cameras to use Alarm Input Armed / IO Linkage on Alarm?



Answer

Alarm Settings for Internet Explorer

If you want to connect external alarm devices:

  • For alarm INPUT device, choose Alarm Input Armed to enable it
  • For alarm OUTPUT device, choose IO Linkage on Alarm to enable it.


IOLINKAGEfirst.png

External Alarm: Set external alarm function ON/OFF.


IOLINKAGE2.png

Alarm Duration: Set external alarm output duration (Relay close time), can be Forever, 5s, 10s, 15s, 30s, 60s.

IOLINKAGE3.png

Lose SD-Card Alarm: Set alarm triggered ON/OFF if the SD-Card is lost.

IOLINKAGE4.png


Alarm Input: Set alarm input ON/OFF, it supports NO/NC external alarm device, choose the correct mode to make sure it works well, it refers to the I/O pin6 (Input2) and pin7 (Input1).

IOLINKAGE5.png

Action with Alarm: These are actions optional for external alarm triggered.

IOLINKAGE6.png

Alarm Settings for Safari, Chrome, Firefox

Click Alarm to enter the interface:

IOLINKAGE7.png

External Alarm: Set external alarm function ON/OFF.

IOLINKAGE8.png

Alarm Duration: Set external alarm output duration (Relay close time), can be Forever, 5s, 10s, 15s, 30s, 60s.

IOLINKAGE9.png

Lose SD-Card Alarm: Set alarm triggered ON/OFF if the SD-Card is lost.

IOLINKAGE10.png

Alarm Input: Set alarm input ON/OFF, it supports NO/NC external alarm device, choose the correct mode to make sure it works well, it refers to the I/O pin6 (Input2) and pin7 (Input1).

IOLINKAGE11.png

Action with Alarm: These are actions optional for external alarm triggered.

IOLINKAGE12.png


IO Pins for IO Alarm Linkage

ALARMINPUT4.png

I/O PINS:

  1. Output
  2. Output
  3. Alarm Input
  4. Input (GND)


Output pins: Output pins (1 & 2) can be used to enable IO linkage on alarm.

  • For example, you might connect an external siren to sound when motion is detected.
  • You can also manually control the output switches via the WebUI buttons ALARMINPUT5.png & ALARMINPUT6.png to turn the connected device ON/OFF.



Input pins: Input pins (3 & 4) can be used for 1-way external sensor input to the camera.

  • For example, you might connect an external Passive Infrared (PIR) Sensor to it triggered the camera to send an e-mail and/or trigger the siren attached to the Output Pins (above).
  • If you link an external alarm device to Pins 3 and 4, when Alarm Input Enable is selected, the external alarm is armed.


NOTE: All pins work as a switch only.