Configuring Third Party Remotes to Send X10 IR Commands

From X10Wiki
Revision as of 00:45, 22 February 2007 by Ericb (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Question

How do I configure my non-X10 universal remote to work with the IR543?

Answer

Some universal remotes, like the Philips Pronto, can download preprogrammed X10 control files for control of a full 16 modules. Also, you should thoroughly check your owner's manual for preprogrammed codes- you may see X10 listed under the AUX section. Third, owners of other learning remotes may wish to purchase one of our remote controls to capture the IR codes. Note that most X10 universal remotes must be specially configured to send IR X10 commands instead of radio X10 commands. The procedure for setting the remotes to send IR is outlined in each remote's manual

Specific Third Party Remote Information

X10 makes no guarantee as to the functionality or safety of any content not on our website.

Preprogrammed Philips Pronto Codes