Difference between revisions of "Differences Between the TM751 and RR501"

From X10Wiki
Jump to: navigation, search
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
==Question==
 
==Question==
  
'''What is the difference between the RR501 and the TM751?'''
+
'''What is the difference between the RR501 / PAT01 and the TM751 / PAT02?'''
  
 
==Answer==
 
==Answer==
  
Both Transceivers receive RF commands from a Remote, Motion Sensor, or Firecracker Interface and transmit the command on the powerline.  
+
*'''BOTH''' Transceivers receive RF commands from a Remote, Motion Sensor, or Firecracker Interface and transmit the command on the powerline.  
  
The RR501 '''will''' respond to powerline commands. The TM751 '''will not'''.  
+
*The '''RR501''' '''''will''''' respond to powerline commands. The '''TM751''' '''''will not'''''.  
  
The RR501 has a 1-or-9 switch, which designates which Unit Code the Transceiver will respond to (activating its relay). The TM751 is hardwired to Unit Code 1 and cannot be changed.  
+
*The '''RR501''' has a 1-or-9 switch, which designates which Unit Code the Transceiver will respond to (activating its relay). The '''TM751''' is hardwired to Unit Code 1 and cannot be changed.  
  
The RR501 does not lock up if it hears its own signal from another transceiver; this is occasionally a problem with multiple TM751s. Unplug and replug each TM751 to fix lockups.
+
*The '''RR501''' does not lock up if it hears its own signal from another transceiver; this is occasionally a problem with multiple '''TM751'''s. Unplug and replug each '''TM751''' to fix lockups.

Latest revision as of 21:40, 9 June 2014

Question

What is the difference between the RR501 / PAT01 and the TM751 / PAT02?

Answer

  • BOTH Transceivers receive RF commands from a Remote, Motion Sensor, or Firecracker Interface and transmit the command on the powerline.
  • The RR501 will respond to powerline commands. The TM751 will not.
  • The RR501 has a 1-or-9 switch, which designates which Unit Code the Transceiver will respond to (activating its relay). The TM751 is hardwired to Unit Code 1 and cannot be changed.
  • The RR501 does not lock up if it hears its own signal from another transceiver; this is occasionally a problem with multiple TM751s. Unplug and replug each TM751 to fix lockups.