Enable Motion Detection after Update

From X10Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Question

I updated the firmware/WebUI of my camera and now it no longer detects motion. What should I do?

Answer

Sometimes a firmware or WebUI update will disable the motion detection of the camera.

This can easily be resolved by doing the following:

  • Log into the camera's WebUI via an Internet Explorer browser
  • Go to SETTINGS then ALARM SETTINGS and MOTION DETECTION
  • Turn MOTION DETECTION OFF and click SAVE
  • Refresh the browser and log back in
  • Turn MOTION DETECTION ON
  • Ensure DETECT ALL is selected under MOTION AREA LIST and click SAVE
  • Return to LIVE VIEW and trigger motion.
Retrieved from "https://kbase.x10.com/index.php?title=Enable_Motion_Detection_after_Update&oldid=13756"