Difference between revisions of "Experiment With Magnet Placement"

From X10Wiki
Jump to navigation Jump to search
Line 5: Line 5:
 
==Answer==
 
==Answer==
  
The magnet and switch can work in other configurations besides having the arrows pointing at each other. You can generally rotate the magnet 90 degrees, or leave a gap of up to about 1/4 inch, and it will still work OK.  
+
The magnet and switch can work in other configurations besides having the arrows pointing at each other.
  
Arm the console before testing magnet positions. Test the position by opening and closing the door or window; if the LED on the DS12A blinks when the door/window is opened, and again when it is closed, then the magnet is close enough.
+
You can generally rotate the magnet '''90 degrees''', or '''leave a gap of up to about 1/4 inch''', and it will still work OK.  
  
To cover larger gaps or when using with moulding, we recommend using a shim to bring the magnet closer.
 
  
Lastly - you could also try using a different, stronger magnet, instead of the magnets we provide.
+
*Arm the console before testing magnet positions. Test the position by opening and closing the door or window; if the LED on the DS12A blinks when the door/window is opened, and again when it is closed, then the magnet is close enough.
 +
 
 +
 
 +
*To cover larger gaps or when using with moulding, we recommend using a shim to bring the magnet closer.
 +
 
 +
 
 +
*Lastly - you could also try using a different, stronger magnet, instead of the magnets we provide.
  
 
We cannot recommend any particular magnet sellers; but do suggest trying [http://www.google.com/products?q=rare+earth+magnet a Google Products search for RARE EARTH MAGNET].
 
We cannot recommend any particular magnet sellers; but do suggest trying [http://www.google.com/products?q=rare+earth+magnet a Google Products search for RARE EARTH MAGNET].

Revision as of 02:19, 18 June 2014

Question

I am installing my Door/Window sensor, but I cannot position the magnet and sensor so that their arrows are pointing exactly at each other. What can I do?

Answer

The magnet and switch can work in other configurations besides having the arrows pointing at each other.

You can generally rotate the magnet 90 degrees, or leave a gap of up to about 1/4 inch, and it will still work OK.


  • Arm the console before testing magnet positions. Test the position by opening and closing the door or window; if the LED on the DS12A blinks when the door/window is opened, and again when it is closed, then the magnet is close enough.


  • To cover larger gaps or when using with moulding, we recommend using a shim to bring the magnet closer.


  • Lastly - you could also try using a different, stronger magnet, instead of the magnets we provide.

We cannot recommend any particular magnet sellers; but do suggest trying a Google Products search for RARE EARTH MAGNET.

Related Articles

Adding A Switch To A Door Sensor