Difference between revisions of "Experiment With Magnet Placement"

From X10Wiki
Jump to navigation Jump to search
 
(6 intermediate revisions by 2 users not shown)
Line 5: Line 5:
 
==Answer==
 
==Answer==
  
The magnet and switch can work in other configurations besides having the arrows pointing at each other. You can generally rotate the magnet 90 degrees, or leave a gap of up to about 1/4 inch, and it will still work OK. To cover bigger gaps, you can always try using a different, stronger magnet, instead of the magnet we provide.
+
The magnet and switch can work in other configurations besides having the arrows pointing at each other.
 +
 
 +
You can generally rotate the magnet '''90 degrees''', or '''leave a gap of up to about 1/4 inch''', and it will still work OK.  
 +
 
 +
 
 +
*Arm the console before testing magnet positions. Test the position by opening and closing the door or window; if the LED on the DS12A blinks when the door/window is opened, and again when it is closed, then the magnet is close enough.
 +
 
 +
 
 +
*To cover larger gaps or when using with molding, we recommend using a shim to bring the magnet closer.
 +
 
 +
 
 +
*Lastly - you could also try using a different, stronger magnet, instead of the magnets we provide.
 +
 
 +
 
 +
We cannot recommend any particular magnet sellers; but do suggest trying [http://www.google.com/products?q=rare+earth+magnet a Google Products search for RARE EARTH MAGNET].
 +
 
 +
 
 +
 
 +
==Related Articles==
 +
 
 +
[[Adding A Switch To A Door Sensor]]

Latest revision as of 02:19, 18 June 2014

Question

I am installing my Door/Window sensor, but I cannot position the magnet and sensor so that their arrows are pointing exactly at each other. What can I do?

Answer

The magnet and switch can work in other configurations besides having the arrows pointing at each other.

You can generally rotate the magnet 90 degrees, or leave a gap of up to about 1/4 inch, and it will still work OK.


  • Arm the console before testing magnet positions. Test the position by opening and closing the door or window; if the LED on the DS12A blinks when the door/window is opened, and again when it is closed, then the magnet is close enough.


  • To cover larger gaps or when using with molding, we recommend using a shim to bring the magnet closer.


  • Lastly - you could also try using a different, stronger magnet, instead of the magnets we provide.


We cannot recommend any particular magnet sellers; but do suggest trying a Google Products search for RARE EARTH MAGNET.


Related Articles

Adding A Switch To A Door Sensor