Fixed IP Address for MJPEG Cameras

From X10Wiki
Revision as of 03:32, 12 January 2018 by X10douglas (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


How do I set my MJPEG IP camera to a fixed IP address?


These settings will work for 99% of home routers. If you are not doing this on a home network, please check with your System Administrator for the correct settings.

  1. Login to the camera using the IP Camera Tool- be sure to note down what IP address the IP Camera Tool gives you.
  2. Click on Network then Basic Network Settings.
  3. Uncheck Obtain IP from DHCP Server.
  4. For IP Addr put in the same IP Address that the IP Camera Tool reported.
  5. Put for the Subnet Mask.
  6. Put the IP address, but with the last digit replaced with a 1, in both Gateway and DNS Server. For example, you should use if the IP address was
  7. If you have more than one camera, or if your ISP blocks traffic on some ports, you will need to change the Http Port and Push Port. We recommend putting the first camera at HTTP Port 8001 and Push Port 9001, the second at 8002 and 9002, the third at 8003 and 9003, and so on.
  8. Click submit - the camera will reboot to apply the changes.

Related Articles

Fixed IP Address for SD Cameras