FloodCam Wiring Errata
Revision as of 00:44, 15 May 2014 by X10douglas
My Floodcam directions show that the lamp holders have white/black wires, but they have blue/brown wires. What do I do?
- Connect the two blue wires from the lamp holders to the short blue wire on the FloodCam body.
- Connect the two brown wires from the lamp holders to the short white wire on the FloodCam body.
- Connect the other three wires (green ground, long white to neutral, and long black to live) as shown in the diagram on page four of your [manual].