FloodCam Wiring Errata

From X10Wiki
Revision as of 00:15, 26 April 2011 by Ericb (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Question

My Floodcam directions show that the lamp holders have white/black wires, but they have blue/brown wires. What do I do?

Answer

Connect the two blue wires from the lamp holders to the short blue wire on the FloodCam body. Connect the two brown wires from the lamp holders to the short white wire on the FloodCam body. Conect the other three wires (green ground, long white to neutral, and long black to live) as shown in the diagram on page four of your manual:

http://software.x10.com/pub/manuals/vt38a-om.pdf