Difference between revisions of "Four Camera System with XRay Vision Setup"
(Perl Automatic Add) |
|||
| Line 1: | Line 1: | ||
| − | + | ==Introduction== | |
| − | + | ||
| − | + | Your X10 multi-camera system allows you to control X10 XCam2 cameras from your PC and view each camera from the XRay Vision software. Follow these instructions to set up the necessary hardware and software. ''Note: You should have | |
| − | Your X10 multi-camera system | + | previously installed XRay Vision on your PC before starting these steps. |
| − | allows you to control X10 XCam2 cameras from your PC and view each | + | |
| − | camera from the XRay Vision software. Follow these instructions to | + | ==Setup== |
| − | set up the necessary hardware and software. | + | |
| − | ''Note: You should have | + | ===Set Up the Transceiver=== |
| − | previously installed XRay Vision on your PC before starting these | + | |
| − | steps. | + | http://graphics.x10.com/images8/tm751_close.jpg |
| − | + | ||
| − | + | Make sure you have connected the trasceiver module (model TM751) to a nearby power outlet. The outlet you use should not be too close to the back of your PC, as your PC may create some electrical noise that will reduce the range of the transceiver. Set the House Code (letter dial) on the transceiver to the letter you will use for your cameras. | |
| − | + | ||
| − | sure you have connected the trasceiver module (model TM751) to a nearby | + | ===Connect the Firecracker Computer Interface=== |
| − | power outlet. The outlet you use should not be too close to the back | + | |
| − | of your PC, as your PC may create some electrical noise that will | + | http://graphics.x10.com/images8/cm17aconnection.jpg |
| − | reduce the range of the transceiver. Set the House Code (letter dial) | + | |
| − | on the transceiver to the letter you will use for your cameras. | + | The Computer Interface (model CM17A) uses wireless signals to transmit X10 control commands from the computer to the transceiver module included in the kit. Connect the Interface directly to your PC's serial port. If there is already a device connected to this port, unplug it, connect the Computer Interface, and then plug the other device into the connector on the CM17A. Important: Do not plug your mouse into the CM17A! |
| − | + | ||
| − | the Firecracker Computer Interface | + | ===Set Up Your Cameras=== |
| − | + | ||
| − | Computer Interface (model CM17A) uses wireless signals to transmit X10 | + | Set the House and Unit code on the addressable power supply (model XM10A). All of the cameras should be set to the same letter (House) code, and each needs its own number (Unit) code. Plug the power supply into a free AC outlet. Connect its camera to the power supply. The camera should show on the TV. Adjust the antenna so that it points toward the antenna of the video receiver. |
| − | control commands from the computer to the transceiver module included | + | When the camera is set up, turn it off using your CR12A Camera Scanning Remote or other X10 remote. Repeat these steps for each camera you are setting up. Make sure to choose a different Unit Code for each camera. |
| − | in the kit. Connect the Interface directly to your PC's serial port. | + | |
| − | If there is already a device connected to this port, unplug it, connect | + | {| width="100%" |
| − | the Computer Interface, and then plug the other device into the connector | + | |http://graphics.x10.com/images8/xm_close.jpg |
| − | on the CM17A. Important: Do not plug your mouse into the CM17A! | + | |http://graphics.x10.com/images8/xm_plug.jpg |
| − | + | |} | |
| − | + | ||
| − | Set the House | + | ===Configure Your Cameras in XRay Vision=== |
| − | and Unit code on the addressable power supply (model XM10A). All of | + | |
| − | the cameras should be set to the same letter (House) code, | + | Run XRay Vision. Right-click in the Program window and choose "Settings," and then "Preferences" from the pop-up menu. Click on the "Cameras" tab in the configuration window. Click on the "Add" button to create an entry for a camera. Click on the "Camera Code" box and enter the House and Unit code for your first camera. Make sure to enter the letter and number without a space between them. In the "Comment" box you can type a description or name for this camera. Repeat these steps for all the cameras you set up earlier. |
| − | and each needs its own number (Unit) code. Plug the power supply | + | |
| − | into a free AC outlet. Connect its camera to the power supply. The camera | + | http://graphics.x10.com/images8/xrv_cams.gif |
| − | should show on the TV. Adjust the antenna so that it points toward the antenna of the video receiver. | + | |
| − | When the camera is set up, turn it off using your CR12A Camera Scanning Remote or other X10 remote. Repeat these | + | You are now ready to control your cameras through XRay Vision. Right-click in the XRay Vision window and choose "Camera." You will be able to select from your different cameras, or tell XRV to automatically switch between all of them. |
| − | steps for each camera you are setting up. Make sure to choose a different | + | |
| − | Unit Code for each camera. | + | ==Related Articles== |
| − | + | [[Multiple Camera System Setup]] | |
| − | + | ||
| − | Your Cameras in XRay Vision | + | Relates to: XX11A, XX12A, XX16A, XX17A, XC10A, XC18A, XC19A, VR36A, VR31A |
| − | Run XRay Vision. | + | |
| − | Right-click in the Program window and choose "Settings," and then "Preferences" | + | [[Troubleshooting Camera Switching]] |
| − | from the pop-up menu. Click on the "Cameras" tab in the configuration | + | |
| − | window. Click on the "Add" button to create an entry for a camera. Click | ||
| − | on the "Camera Code" box and enter the House and Unit code for your first camera. | ||
| − | Make sure to enter the letter and number without a space between | ||
| − | them. In the "Comment" box you can type a description or name for this | ||
| − | camera. Repeat these steps for all the cameras you set up earlier. | ||
| − | |||
| − | You are now | ||
| − | ready to control your cameras through XRay Vision. Right-click in the XRay Vision | ||
| − | window and choose "Camera." You will be able to select from your different | ||
| − | cameras, or tell XRV to automatically switch between all of them. | ||
| − | Related Articles | ||
| − | [ | ||
| − | |||
| − | Relates to: | ||
| − | XX11A, XX12A, XX16A, XX17A, XC10A, XC18A, XC19A, VR36A, VR31A | ||
| − | [ | ||
Key Topics: camera, switch, multi, multiple, on, off, group | Key Topics: camera, switch, multi, multiple, on, off, group | ||
| − | Relates to: | + | Relates to: XX11A, XX12A, XX16A, XX17A, XC10A, XC18A, XC19A |
| − | XX11A, XX12A, XX16A, XX17A, XC10A, XC18A, XC19A | + | |
| − | [ | + | [[Multiple Cameras with One Video Receiver]] |
| + | |||
Key Topics: multi, multiple, camera, video, receiver, switch | Key Topics: multi, multiple, camera, video, receiver, switch | ||
| − | Relates to: | + | |
| − | XX11A, XX12A, XX16A, XX17A, XC10A, XC18A, XC19A, VR36A, VR31A | + | Relates to: XX11A, XX12A, XX16A, XX17A, XC10A, XC18A, XC19A, VR36A, VR31A |
| − | [ | + | |
| + | [[Category:hardware]] | ||
| + | [[Category:software]] | ||
| + | [[Category:frequently asked questions]] | ||
Revision as of 21:57, 17 March 2006
Introduction
Your X10 multi-camera system allows you to control X10 XCam2 cameras from your PC and view each camera from the XRay Vision software. Follow these instructions to set up the necessary hardware and software. Note: You should have previously installed XRay Vision on your PC before starting these steps.
Setup
Set Up the Transceiver
Make sure you have connected the trasceiver module (model TM751) to a nearby power outlet. The outlet you use should not be too close to the back of your PC, as your PC may create some electrical noise that will reduce the range of the transceiver. Set the House Code (letter dial) on the transceiver to the letter you will use for your cameras.
Connect the Firecracker Computer Interface
The Computer Interface (model CM17A) uses wireless signals to transmit X10 control commands from the computer to the transceiver module included in the kit. Connect the Interface directly to your PC's serial port. If there is already a device connected to this port, unplug it, connect the Computer Interface, and then plug the other device into the connector on the CM17A. Important: Do not plug your mouse into the CM17A!
Set Up Your Cameras
Set the House and Unit code on the addressable power supply (model XM10A). All of the cameras should be set to the same letter (House) code, and each needs its own number (Unit) code. Plug the power supply into a free AC outlet. Connect its camera to the power supply. The camera should show on the TV. Adjust the antenna so that it points toward the antenna of the video receiver. When the camera is set up, turn it off using your CR12A Camera Scanning Remote or other X10 remote. Repeat these steps for each camera you are setting up. Make sure to choose a different Unit Code for each camera.
|
|
Configure Your Cameras in XRay Vision
Run XRay Vision. Right-click in the Program window and choose "Settings," and then "Preferences" from the pop-up menu. Click on the "Cameras" tab in the configuration window. Click on the "Add" button to create an entry for a camera. Click on the "Camera Code" box and enter the House and Unit code for your first camera. Make sure to enter the letter and number without a space between them. In the "Comment" box you can type a description or name for this camera. Repeat these steps for all the cameras you set up earlier.
You are now ready to control your cameras through XRay Vision. Right-click in the XRay Vision window and choose "Camera." You will be able to select from your different cameras, or tell XRV to automatically switch between all of them.
Related Articles
Relates to: XX11A, XX12A, XX16A, XX17A, XC10A, XC18A, XC19A, VR36A, VR31A
Troubleshooting Camera Switching
Key Topics: camera, switch, multi, multiple, on, off, group Relates to: XX11A, XX12A, XX16A, XX17A, XC10A, XC18A, XC19A
Multiple Cameras with One Video Receiver
Key Topics: multi, multiple, camera, video, receiver, switch
Relates to: XX11A, XX12A, XX16A, XX17A, XC10A, XC18A, XC19A, VR36A, VR31A