Getting Started with the AirPad

From X10Wiki
Jump to navigation Jump to search

Question

How do I set up and use my AirPad?

Answer

Getting Started

A few things you need to know to get started.

First charge the battery in your AirPad, connect the included power supply to the jack on the side of your AirPad (labeled DC 5V) and plug the power supply into an AC outlet. It may take up to 4 hours to fully charge the unit.

First it is recommended that you read the small booklet included with your AirPad to familiarize yourself with the basic procedure such as turning the unit on, etc. The House symbol Home.jpg takes you to your Home screen at any time. It shows up in a few places but is always visible in the top left hand corner of the screen. The Back symbol Back.jpg at the top right hand corner of the screen takes you back one screen each time you touch it. (You can also press the hard key on the top of your AirPad (labeled on the back of the AirPad as ESC).

You’ll likely want to set the date and time on your AirPad before you go much further. In order to connect to the Internet, so you can visit the Google Android Market and install applications, you’ll need to turn on Wi-Fi.