Improving PTZ Control Range With CM19A

From X10Wiki
Revision as of 21:27, 14 February 2007 by Ericb (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Question

Why can I pan and tilt my cameras from my remote, but not from ActiveHome Pro?

Answer

If you are having problems with your remote control or motion sensor, it is always a good idea to first make sure you have fresh batteries in it.

Your USB Transceiver (CM19A) uses radio frequency ("RF") signals to communicate with the pan/tilt mechanisms, so it is best to set up the interface for optimal transmission. Here are some options to try:

  • Position the CM19A as high as possible on the wall, and as far away from your computer as possible.
  • Hold your remote control right next to the CM19A and see if it can still move the cameras.
  • Use a USB extension cable to reposition the CM19A further away from the computer.

Related Articles

Troubleshooting Remote Controls in ActiveHome Pro

Key Topics: remote, control, rf, radio, frequency, receive, transmit, power, line, transceive, house, code

Relates to: CM15A, SW31A