From X10Wiki
Revision as of 12:51, 3 July 2014 by X10douglas (talk | contribs)
Jump to navigation Jump to search

X10 LM465 and PRO PLM01/PLM03: Lamp Module


Product Pages


0.28 lbs.
Power Supply
120VAC @ 60Hz
Max Load
300W incandescent

  • PLM01 The AGC Lamp Module incorporates an advanced X10 Powerline circuit design which allows the Module to operate in adverse environments. The principal advantage is better noise rejection. These Modules are recommended for all installations where reliability of operation is paramount.
  • PLM03 The NON-AGC Lamp Module principal advantage is greater sensitivity to the X10 Command Signal in an installation where electronic interference is low.

  • Responds to All Lights On and All Units Off.

Related Pages

Lamp Modules

Troubleshooting Lamp Modules

Lamp Module Questions

Why do some modules work in some outlets and not in others?

Why do some modules sometimes turn on and off by themselves?

How can I stop an "endless dim" with my Firecracker kit?

What is the local control feature on the Lamp and Appliance Modules?

Why does my Lamp or Appliance Module turn on immediately after being turned off?

Why does a low-wattage light connected to my Lamp or Appliance Module flicker after being turned off?

Why does my new lamp module take about two seconds to turn on or off?

Modules can be turned off but not turned on from the X10 powerline signal. What might cause this?

Why does my Lamp Module turn on but not off?

Since there are 256 possible addresses, am I limited to 256 controlled devices?

How can I program my socket rocket with a remote?

How can I program my socket rocket without a remote?

There is a sticker on my Socket Rocket that says it must be mounted pointing down. Why does it say that?