Making a PowerHorn Macro
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Question
How can I control a PowerHorn siren from ActiveHome Pro?
Answer
Plug in the PowerHorn siren, then define an AM466 Three-Pin Appliance Module in ActiveHome Pro at the address of the PowerHorn. Build a Macro with a different Trigger Code than the PowerHorn's address. Put the following steps in the macro:
- Delay 2 Seconds
- Appliance Module On
- Delay 2 Seconds
- Appliance Module On
You should repeat this sequence of steps at least 4 times. After building this macro, go to the room in which it resides, then click its Run Macro button. The siren should go off. About 5 seconds after the macro finishes running, the siren should stop sounding.