Difference between revisions of "Manual Lens Adjustment"

From X10Wiki
Jump to: navigation, search
(Created page with "==How to make a manual lens adjustment on an XX60A: AirSight Outdoor PTZ P2P IP Camera== '''Before installing your AirSight camera please remove the foam insert from inside t...")
 
Line 1: Line 1:
==How to make a manual lens adjustment on an XX60A: AirSight Outdoor PTZ P2P IP Camera==
+
'''How to make a manual lens adjustment on an XX60A: AirSight Outdoor PTZ P2P IP Camera:'''
 
+
'''Before installing your AirSight camera please remove the foam insert from inside the camera:'''
+
  
 
Unscrew and remove the dome by rotating it counterclockwise.  
 
Unscrew and remove the dome by rotating it counterclockwise.  
  
  
[[Image:Dome1.png]]  
+
[[File:Dome3.png]]
 +
 
 +
 
 +
Locate and remove the screw at the base of the lens.
 +
 
  
 +
[[File:XX60ASCREW.PNG]]
  
Remove the protective foam insert from inside the camera
 
  
[[Image:Dome2.png]]
+
Gently twist and pull up on the lens to make the adjustment.
  
  
[[Image:Dome3.png]]
+
[[File:XX60ATWIST.PNG]]
  
  
Replace the dome by rotating it clockwise.
+
Continue to make slight adjustments until the image is focused.
  
  
Remove the protective film from the dome.
+
[[File:XX60AB4NAFTER.PNG]]
  
  
[[Image:Dome1.png]]
+
Replace the screw at the base of the lens and replace the dome by rotating it clockwise.

Revision as of 17:30, 3 August 2016

How to make a manual lens adjustment on an XX60A: AirSight Outdoor PTZ P2P IP Camera:

Unscrew and remove the dome by rotating it counterclockwise.


Dome3.png


Locate and remove the screw at the base of the lens.


File:XX60ASCREW.PNG


Gently twist and pull up on the lens to make the adjustment.


File:XX60ATWIST.PNG


Continue to make slight adjustments until the image is focused.


File:XX60AB4NAFTER.PNG


Replace the screw at the base of the lens and replace the dome by rotating it clockwise.