Difference between revisions of "Manual Lens Adjustment"

From X10Wiki
Jump to: navigation, search
Line 1: Line 1:
 
'''How to make a manual lens adjustment on an XX60A: AirSight Outdoor PTZ P2P IP Camera:'''
 
'''How to make a manual lens adjustment on an XX60A: AirSight Outdoor PTZ P2P IP Camera:'''
  
Unscrew and remove the dome by rotating it counterclockwise.  
+
1) Unscrew and remove the dome by rotating it counterclockwise.  
  
  
Line 7: Line 7:
  
  
Locate and remove the screw at the base of the lens.
+
2) Locate and remove the screw at the base of the lens.
  
  
Line 13: Line 13:
  
  
Gently twist and pull up on the lens to make the adjustment.
+
3) Gently twist and pull up on the lens to make the adjustment.
  
  
Line 19: Line 19:
  
  
Continue to make slight adjustments until the image is focused.
+
4) Continue to make slight adjustments until the image is focused.
  
  
Line 25: Line 25:
  
  
Replace the screw at the base of the lens and replace the dome by rotating it clockwise.
+
5) Replace the screw at the base of the lens and replace the dome by rotating it clockwise.

Revision as of 17:31, 3 August 2016

How to make a manual lens adjustment on an XX60A: AirSight Outdoor PTZ P2P IP Camera:

1) Unscrew and remove the dome by rotating it counterclockwise.


Dome3.png


2) Locate and remove the screw at the base of the lens.


File:XX60ASCREW.PNG


3) Gently twist and pull up on the lens to make the adjustment.


File:XX60ATWIST.PNG


4) Continue to make slight adjustments until the image is focused.


File:XX60AB4NAFTER.PNG


5) Replace the screw at the base of the lens and replace the dome by rotating it clockwise.