MiniTimer Setup

Question

How do I set up my MT10A MiniTimer?

Answer

• Plug your MiniTimer into any AC outlet

• Set the clock by switching the MODE switch to "SET CLOCK" and use the rocking "TIME" keys to set the time.

• Adjust your Lamp or Appliance Modules to the same HouseCode as the MiniTimer. You may need a screwdriver, kitchen knife, or the tip of an electrical prong to turn the dial.

• Set the UnitCode on your Lamp or Appliance Module to any number between 1 and 8. The combination of your Unit and House code’s makes your module’s distinct address. This way your timer knows which modules to turn on and off.

• Set the MODE switch on the MiniTimer to the "RUN" position.

• Test that your modules are working correctly by pressing the "ON" rocker key on the MiniTimer key pad that corresponds to the UnitCode number you set for your module above.

• Press the rocker key to "OFF" to then turn your lamp or appliance off.

• To program a timed event, place the MODE switch in the "PROG SET" position.

• Use the up and down arrows to advance to the desired time.

• Press any of the 4 ON or OFF rocker keys to set an on or off time for that Module. This will program the Mini Timer to turn that Module on (or off) at that time every day.