Difference between revisions of "Mini Timer Troubleshooting"

From X10Wiki
Jump to: navigation, search
(3) Can you control all your modules by pushing the buttons on the MiniTimer?)
Line 5: Line 5:
 
==Answer==
 
==Answer==
  
==1) Is it flashing 18:88?==
+
===1) Is it flashing 18:88?===
 
   Y=[[18:88 Error]]
 
   Y=[[18:88 Error]]
 
   N='''go to 2'''
 
   N='''go to 2'''
 
    
 
    
==2) Does it light up when you plug it in? Does a red light come on when you press a On/Off button? Does the clock keep accurate time?==
+
===2) Does it light up when you plug it in? Does a red light come on when you press a On/Off button? Does the clock keep accurate time?===
 
   Y='''go to 3'''
 
   Y='''go to 3'''
 
   N=If the MiniTimer does not light up at all then it is probably defective.
 
   N=If the MiniTimer does not light up at all then it is probably defective.
  
  
==3) Can you control all your modules by pushing the buttons on the MiniTimer? ==
+
===3) Can you control all your modules by pushing the buttons on the MiniTimer? ===
 
   Y='''go to 4'''
 
   Y='''go to 4'''
 
   N=[[MiniTimer module control]]
 
   N=[[MiniTimer module control]]
  
==4) When you set a timer, does it run if you make sure the 1-4/5-8 switch is in the correct position and you make sure you have AM/PM correct? ==
+
===4) When you set a timer, does it run if you make sure the 1-4/5-8 switch is in the correct position and you make sure you have AM/PM correct? ===
 
   Y= '''go to 5'''
 
   Y= '''go to 5'''
 
   N= Double-check that your answer to 3 is Yes; if so, your MiniTimer is probably defective.
 
   N= Double-check that your answer to 3 is Yes; if so, your MiniTimer is probably defective.
 
    
 
    
==5) Are you having difficulties deleting an existing timer? ==
+
===5) Are you having difficulties deleting an existing timer? ===
  
 
   Y=[[Deleting Stored MiniTimer Events]]  
 
   Y=[[Deleting Stored MiniTimer Events]]  

Revision as of 19:42, 1 August 2006

Question

Why ain't it workin' right?

Answer

1) Is it flashing 18:88?

  Y=18:88 Error
  N=go to 2
  

2) Does it light up when you plug it in? Does a red light come on when you press a On/Off button? Does the clock keep accurate time?

  Y=go to 3
  N=If the MiniTimer does not light up at all then it is probably defective.


3) Can you control all your modules by pushing the buttons on the MiniTimer?

  Y=go to 4
  N=MiniTimer module control

4) When you set a timer, does it run if you make sure the 1-4/5-8 switch is in the correct position and you make sure you have AM/PM correct?

  Y= go to 5
  N= Double-check that your answer to 3 is Yes; if so, your MiniTimer is probably defective.
  

5) Are you having difficulties deleting an existing timer?

  Y=Deleting Stored MiniTimer Events 
  N=Please email techpriority@x10.com with a detailed description of the problem you are experiencing.

If you have problems answering these questions, please refer to MiniTimer Setup.