MyHouse Online Port and Protocol Information

From X10Wiki
Jump to navigation Jump to search

Questions

What ports and protocols does MyHouse Online use?

What ports do I need to allow traffic on in my firewall or Internet security software?

Why has x10 not added the ability to control port use for those thousands of users whose internet supplier blocks ports 80 and 443?"

Answer

The MyHouse Online Service will work for almost all Internet connection configurations, including most firewalls and with Network Address Translation (NAT). If you have extra security on the computer where you are using MyHouse Online, you may need to make some changes to the software to allow your MyHouse connection to work. Before you do, be sure you are logged in as a Power User or Administrator so that you can effect these changes.

Make sure the computer is able to accept incoming and outgoing TCP connections to myhouse.x10.com on port 80 and 443. Blocked or rerouted ports are behind about ninety-five percent of registration and connection problems. To verify this, run the Internet Connection Test at the following location:

http://www.x10.com/support/netinfo/netinfoadvance.htm

Type in 80 at the bottom where it says "listening port" and click on "Run Test Again." If it won't let you click on it, you will have to wait for the current test to finish - this could take up to 5 minutes. If 80 passes, test 443.

Since each security program and firewall is different, you will need to consult your manual or the provided technical support for information on how to make the necessary changes.

You may find that port 80 and 443 will not bind to run the above test. The port you need to punch through on your firewall is port 8001. Open up port 8001 on your firewall NAT to your PC. Then test it with the above link and enter in 8001 as the port. This was found in another response: http://www.x10.com/kbase/articles/a00294.html

If you have video cameras, then you need to review this article as well: http://kbase.x10.com/wiki/Port_Forwarding_For_X10_Software to open up ports 8080 and 8888

Related Articles

Setting Up Remote Users in MyHouse Online

Key Topics: user,remote,add,create,configure,password,access
Relates to: CM15A, SW31A, SW32A, SW33A, SW34A

Troubleshooting Remote Connections in MyHouse Online

Key Topics: myhouse,online,problem,trouble,troubleshoot,remote,access,user,client,service,port,firewall
Relates to: SW34A

Sending E-mail with MyHouse Online

Key Topics: myhouse,email,e-mail,macro,send,address
Relates to: SW34A

MyHouse E-mail Configuration

Key Topics: e-mail,configuration,setup
Relates to: SW34A

Using the Remote Connection

Key Topics: sw34a, remote, connection, myhouse
Relates to: SW34A

Setting Up User Configuration

Key Topics: myhouse, setup, user, configuration, sw34a
Relates to: SW34A