NEW AirSight App Features

From X10Wiki
Revision as of 01:17, 8 January 2016 by X10douglas (talk | contribs) (Created page with "'''Here is a simple guide that will walk you through the features available in the AirSight App''' File:NewAppLogo.JPG ==Getting to know the AirSight app== '''Upon run...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Here is a simple guide that will walk you through the features available in the AirSight App

NewAppLogo.JPG


Getting to know the AirSight app

Upon running the app for the first time you will be presented with a blank CAMERA LIST

EMPTY.png


Use the icons along the bottom of the screen to navigate between the different tabs



CAMERA Tab

After you've added your cameras to the app - you will return to the ADD CAMERA tab to see your list of cameras as well as their status

TheNewCameraList.png


Use the EDIT button to delete cameras from your list

DELETE.png


The SEARCH BAR can be used to quickly locate a specific camera in your list

SEARCH.png


To edit the settings for the camera tap the SETTINGS ARROW to the right of the camera name to access the EDIT CAMERA MENU

TheNewCameraListArrow.png


From the EDIT CAMERA MENU you can:

EditCameraMenu2.png

  • Rename the camera
  • Access the ADVANCED SETTINGS MENU
  • Reconnect the camera if it's gone off line.
  • Reboot the camera

NOTE: The PASSWORD field, while editable, will NOT change the P2P password for your camera. (See the Security Code Menu section below).


Advanced Settings Menu

The ADVANCED SETTINGS menu shows the current setting for the camera.

To edit tap the RIGHT ARROW button to access that setting's menu options.

AdvancedSettingsMenu2.png


Security Code Menu

You can change the P2P password for your camera from the SECURITY CODE menu

  • OLD: Type the password your want to change
  • NEW: Type your newly chosen password
  • CONFIRM: Re-Type your newly chosen password
  • Tap OK to SAVE.


SecurityCodeMenu.png


Video Quality Menu

Use the VIDEO QUALITY menu to adjust the quality of the image

VideoQualityMenu.png


Video Flip Menu

If the need to mount the camera in an abnormal position arises, use the VIDEO FLIP menu to change the orientation of the image:

  • NORMAL: Default orientation
  • VERTICAL FLIP: For mounting camera upside down.
  • HORIZONTAL FLIP: Mirror Image orientation
  • VERTICAL AND HORIZONTAL FLIP: Both


VideoFlipMenu.png


Environmental Mode Menu

Use ENVIRONMENT MODE menu to select the appropriate mode for the cameras viewing environment:

EnvironModeMenu.png


  • INDOOR MODE: Used for normal indoor environments (50-60Hz)

Power line frequency or mains frequency is the frequency of the oscillations of alternating current (AC) in an electric power grid transmitted from a power plant to the end-user. In large parts of the world this is 50 Hz, although here in America, and some parts of Asia it is typically 60 Hz. AirSight IP cameras have multi-voltage (100-240VAC, 50-60Hz) power supplies for use in both environments - the Light Frequency is simply to communicate to the software which one is in use - however it is unlikely that changing from 50Hz to 60Hz will provide a noticeable difference.


  • OUTDOOR MODE: Used for cameras mounted outdoors or facing out windows

NOTE: Facing a camera out a window renders them useless for night time viewing due to the reflection of the IR LEDs.


  • NIGHT MODE: Select this mode if Night Vision is the sole operating environment

The AirSight IP cameras will switch to Night Vision in all environmental modes when a change in light is detected. NIGHT MODE should only be chosen if the camera will not be utilized in daylight environments.



WiFi Menu

Use the WIFI menu to program the camera to your wireless network

Locate your wireless network from the list of available networks

WiFiMenu.png


Tap your network name in the CHOOSE A NETWORK list to access the JOIN NETWORK menu

JoinNetMenu.png

Type in your WiFi password (case sensitive) and tap JOIN



Motion Detection Menu

Since the AirSight IP cameras have built-in motion detection the AirSight app can track each instance as an event and save it to the EVENTS list on the EVENTS tab.

Use the MOTION DETECTION menu to adjust the camera's sensitivity to motion.

MotionDetectMenu.png


If you own an AirSight HD SD P2P camera (XX59A) you can also setup the camera to record video on motion to the SD card.

  • Instructions can be found: HERE



About Device Menu

The cameras current firmware version can be located in the ABOUT DEVICE menu under VERSION

For AirSight models with SD recording features, you can also determine the size of the on-board SD card (not included) as well as the amount of free space available.

AboutDeviceMenu.png



Indicator Menu

Use the INDICATOR menu to adjust the frequency at which the red indicator light on the front of the camera flashes.

IndicatorMenu.png



Live View

To view live video tap the image of your camera on the CAMERA tab to access the LIVE VIEW menu

VIEW.png


While your phone is in vertical orientation you can access all of the features available for your camera by clicking on the small icons located along the bottom of the screen:

F LiveView.png


  • Record Video
  • Take a Snapshot
  • Listen and Talk with Two-Way Audio: (XX60A PTZ requires external mic and speaker -not included)
  • Set Preset Position
  • Call Preset Position


While the phone is in horizontal orientation you can access:

  • Record Video
  • Take a Snapshot
  • Listen and Talk with Two-Way Audio: (XX60A PTZ requires external mic and speaker -not included)

F RotateNew.png


If your camera model has the ability to zoom - you will notice additional buttons added: F Zoom.png

To zoom your camera in and out you can either pinch/spread the image with your fingers or use the


Zoom In F ZoomI.png and Zoom Out F ZoomO.png icons.


Record Video

To record live video simply tap the video camera icon to access the RECORD CONTROL menu

F MotionRecord.png


From the RECORD CONTROL menu you can start and stop your recordings.

F RecordControl.png


Snapshots

To take snapshots simply tap the camera icon

F SnapShot.png


You will receive a message that a snapshot was successfully saved to your PHOTOS folder of your phone.

F SnapShotSaved.png


Listen and Talk with Two-Way Audio

Most of the AirSight IP camera models include an on-board microphone and speaker providing two-way audio communication.

F Audio.png


For AirSight IP camera models that do not (XX60A PTZ) an external microphone and speaker are required to utilize this feature.

Simply tap the speaker icon to access the AUDIO CONTROL menu

AudioControl.png


The audio status box will let you know what mode the camera is currently in: Mute, Listen, or Speak.

F AudioStatus.png


Presets

Most of the AirSight IP camera models can pan and tilt and some even have the ability to zoom.

Use the preset feature to program up to 16 preset positions for your camera to quickly retrieve later.

F Preset.png


To program a preset position, pan/tilt/zoom to the desired location and tap the PRESET SAVE icon

F PresetSave.png


A numbered menu appears - tap a number to program that preset position

F PresetSaveChoose.png


To call that preset position - tap the PRESET icon

F PresetGo.png


A numbered menu appears - tap a number to call that preset position

Your camera will pan/tilt/zoom to the appointed position that you set.

F PresetGoChoose.png


Exit Live View

To exit the Live View menu simply tap the BACK button to return to your camera list to view other cameras.

F Back.png

EVENT Tab

If MOTION DETECTION has been turned on in the ADVANCED SETTING MENU the app keeps record of each event in the EVENTS tab

NewEvents.png


To access the list of events for each camera tap the ARROW to the right of the camera name to access it's EVENT LIST

NewEventsArrow.png NewEventList.png


Use the SEARCH button to quickly navigate to a specific event based on when the event occurred

EventListSearch.png


  • Note: Events cannot be deleted from the app - the only way to remove them from your phone is to delete the app.



LOCALRECORD Tab

Use the LOCALRECORD tab to access your VIDEO and SNAPSHOTS

LocalRecordTabNew.png


Use the VIDEO and SNAPSHOT tabs at the top of the screen to navigate between them

LRTN.png



Tap the ARROW to the right of the camera's name to access the PHOTO or VIDEO menu

LRT2N.png NewCameraPhotos.png



Tap the PHOTO or VIDEO to view

NewPhotoView.png NewPhotoViewIcons.png


Use the DELETE and SAVE icons to discard or save to your PHOTOS folder on your phone.



If this is the first time saving PHOTOS or VIDEO tap OK when prompted

NewAccessPhotoOk.png


The app will notify you the image was saved successfully - tap OK to return to your list of photos or videos

NewSaveToAlbum.png

ADD CAMERA Tab

Additional information on how to use these menus can be found here:


The ADD CAMERA menu lists all of the IP cameras found connected to the local network

TheNewAddCamera.png


Use the REFRESH button to refresh the list of cameras in "Camera Found! (0)" list if your camera doesn't automatically show up

RefreshAddCamera.png


Tap your camera in the "Camera Found! (0)" list to access the ADD CAMERA menu

TNACM.png


If you are not at the physical location of the camera you can manually add it by tapping the ADD button to enter in the camera's credentials

NewManualAddCamera.png TheNewAddCameraMenu.png


You can also add your camera by scanning the QR code sticker on the label

  • Note: If you have trouble viewing the camera after using this method we recommend deleting the camera from the app and re-installing using the steps found HERE


Focus the QR code in the center of the box on the screen - once the code is scanned it automatically opens the ADD CAMERA menu


QRADD.png QRScanMenu.png


Enter the P2P password for the camera (default 000000) and press SAVE

TNACM2.png



INFO Tab

Your current version of the app can be found on the APP INFO menu of the INFO tab

TheNewInfoTab.png



Related Products