Difference between revisions of "NEW Alarm Input Armed / IO Linkage on Alarm"

From X10Wiki
Jump to: navigation, search
(Created page with "== Question == How do I setup my Airsight HD Cameras to use Alarm Input Armed / IO Linkage on Alarm? ---- == Answer == '''If you want to connect external alarm devices:'''...")
 
Line 11: Line 11:
 
*Set the ALARM DURATION
 
*Set the ALARM DURATION
 
*Select ON from the LOSE SD-CARD ALARM drop down menu if you'd like to be notified, via your external alarm device, in the event the optional SDCard is removed.
 
*Select ON from the LOSE SD-CARD ALARM drop down menu if you'd like to be notified, via your external alarm device, in the event the optional SDCard is removed.
*For an alarm '''INPUT''' device, choose ENABLE, next to '''ALARM INPUT''' and then indicate whether the external device uses a N.O. (normally open) or N.C. (normally closed) relay to trigger the alarm.
+
*For an alarm '''INPUT''' device, choose ENABLE, next to ALARM INPUT and then indicate whether the external device uses a N.O. (normally open) or N.C. (normally closed) relay to trigger the alarm.
*For an alarm '''OUTPUT''' device, choose the appropriate actions under '''Linkage With Alarm''' to enable it.
+
*For an alarm '''OUTPUT''' device, choose the appropriate actions under LINKAGE WITH ALARM to enable it.
 
*Optionally, you can also designate days and times you want your external alarm settings to be turned on by checking SCHEDULE
 
*Optionally, you can also designate days and times you want your external alarm settings to be turned on by checking SCHEDULE
 
*Click SAVE
 
*Click SAVE
 +
 +
[[File:NEWALARM.png]]
 +
  
  

Revision as of 22:07, 11 January 2016

Question

How do I setup my Airsight HD Cameras to use Alarm Input Armed / IO Linkage on Alarm?



Answer

If you want to connect external alarm devices:

  • Check EXTERNAL ALARM to turn this feature ON/OFF
  • Set the ALARM DURATION
  • Select ON from the LOSE SD-CARD ALARM drop down menu if you'd like to be notified, via your external alarm device, in the event the optional SDCard is removed.
  • For an alarm INPUT device, choose ENABLE, next to ALARM INPUT and then indicate whether the external device uses a N.O. (normally open) or N.C. (normally closed) relay to trigger the alarm.
  • For an alarm OUTPUT device, choose the appropriate actions under LINKAGE WITH ALARM to enable it.
  • Optionally, you can also designate days and times you want your external alarm settings to be turned on by checking SCHEDULE
  • Click SAVE

NEWALARM.png


IO Pins for IO Alarm Linkage

ALARMINPUT4.png

I/O PINS:

  1. Output
  2. Output
  3. Alarm Input
  4. Input (GND)


Output pins: Output pins (1 & 2) can be used to enable IO linkage on alarm.

  • For example, you might connect an external siren to sound when motion is detected.
  • You can also manually control the output switches via the WebUI buttons ALARMINPUT5.png & ALARMINPUT6.png to turn the connected device ON/OFF.



Input pins: Input pins (3 & 4) can be used for 1-way external sensor input to the camera.

  • For example, you might connect an external Passive Infrared (PIR) Sensor to it triggered the camera to send an e-mail and/or trigger the siren attached to the Output Pins (above).
  • If you link an external alarm device to Pins 3 and 4, when Alarm Input Enable is selected, the external alarm is armed.


NOTE: All pins work as a switch only.