Difference between revisions of "NEW H264 Camera Path Settings"

From X10Wiki
Jump to: navigation, search
(Created page with "==Question== '''How do I change the recording path on my H.264 AirSight camera?''' ==Answer== These options require ActiveX Controls. Currently Internet Explorer is the onl...")
 
Line 6: Line 6:
  
 
These options require ActiveX Controls. Currently Internet Explorer is the only browser that can utilize these options.  
 
These options require ActiveX Controls. Currently Internet Explorer is the only browser that can utilize these options.  
#Log into your camera using Internet Explorer
 
#Access the Settings Menu
 
#Click on “Local Settings”
 
#Click “Browse” under RECORD PATH and choose the location on your hard drive you wish to record to.
 
#If the change was successful the camera will report “File Path Success”. If the change failed the camera will report the opposite.
 
  
If the file path will not change using the steps listed above please try the following steps. (Windows 7 or Vista’s security level is higher than Windows XP, for “Path Settings”)
+
#Click the Windows START button
 
+
#Then choose ALL PROGRAMS
#Open Internet Explorer 32bit as an administrator by clicking on the Window’s start menu> All Programs> Right click on the Internet Explorer version that is not labeled as 64bit. Click “Run as Administrator”
+
#Find INTERNET EXPLORER in the list and RIGHT-CLICK to select RUN AS ADMINISTRATOR
#In the address bar of that new window of Internet Explorer type in your camera’s IP address and log in to the Active X mode sign in option.  
+
#Click YES when prompted to "MAKE CHANGES"
#Click on “Tools” in Internet Explorer and choose “Internet Options”. Click on the “Security” tab and then click on “Trusted Sites”.
+
#Type your camera's IP ADDRESS in the address bard to log into your camera using THIS Internet Explorer window.
#Click on “Sites” and uncheck the box marked “Require Server Verification (https) for all sites in this zone”.
+
#Access the SETTINGS Menu from the SETTINGS tab at the top of your screen
#Click “Add”, click “Close”, click “Apply” and then click “OK”.  
+
#Click on the RECORD menu and choose LOCAL SETTINGS
#Refresh Internet Explorer, log back into the camera using Active X mode, and repeat Steps 1 – 4 in the beginning of this article.
+
#Click BROWSE next to RECORD PATH and choose the location on your hard drive you wish to record to.  
 +
#Return to the LIVE VIDEO tab
  
 
The file path should now be successfully changed and your camera will now record to that specified path.
 
The file path should now be successfully changed and your camera will now record to that specified path.

Revision as of 20:07, 28 July 2016

Question

How do I change the recording path on my H.264 AirSight camera?

Answer

These options require ActiveX Controls. Currently Internet Explorer is the only browser that can utilize these options.

  1. Click the Windows START button
  2. Then choose ALL PROGRAMS
  3. Find INTERNET EXPLORER in the list and RIGHT-CLICK to select RUN AS ADMINISTRATOR
  4. Click YES when prompted to "MAKE CHANGES"
  5. Type your camera's IP ADDRESS in the address bard to log into your camera using THIS Internet Explorer window.
  6. Access the SETTINGS Menu from the SETTINGS tab at the top of your screen
  7. Click on the RECORD menu and choose LOCAL SETTINGS
  8. Click BROWSE next to RECORD PATH and choose the location on your hard drive you wish to record to.
  9. Return to the LIVE VIDEO tab

The file path should now be successfully changed and your camera will now record to that specified path.