NEW XX51A Getting Started
Revision as of 00:33, 24 January 2015 by X10douglas (talk | contribs) (Created page with "'''Please follow these few simple steps to get started. This might be all you need. You can then look at your owner's manual later for more setup options.''' Image:Xx51a 3....")
Please follow these few simple steps to get started. This might be all you need. You can then look at your owner's manual later for more setup options.
NEW XX51A Indoor P2P Wired/Wireless IP Camera Quick Installation Guide (Using IE Browser)
Introduction
You can access your camera's live video feed from your web browser on your computer by following these steps, OR from your tablet, or smartphone.
'Introduction'Step 1: Hardware Installation
You need to set up your camera using a network cable (wired) first before you attempt to use it wirelessly. It is recommended that you set the camera up indoors first, before routing the cables through an external wall to mount it outdoors.
- Install the Wi-Fi antenna.
- Plug the power adapter into the camera and into an AC outlet.
- Plug one end of the network cable into the camera, and the other end into your router/switch.
Step 2: Software Installation
