Difference between revisions of "New Quick Start Guide"

From X10Wiki
Jump to navigation Jump to search
Line 46: Line 46:
 
#Go to "Advanced Settings [[Image:Advancedsettings1.jpg]]
 
#Go to "Advanced Settings [[Image:Advancedsettings1.jpg]]
 
#Select "WiFi                          [[Image:Selectwifi1.jpg]]
 
#Select "WiFi                          [[Image:Selectwifi1.jpg]]
#Choose your WiFi network and input your password. [[Image:Example.jpg]]
+
#Choose your WiFi network from the list and input your password. [[Image:Password.png]]
 
#Unplug camera from the network cable.
 
#Unplug camera from the network cable.
#'''Power Down''' and '''Reboot''' your camera by unplugging the camera's AC adapter.[[Image:Unplug.png]]
+
#'''Power Down''' and '''Reboot''' your camera by unplugging the camera's AC adapter. Wait a couple seconds, then plug your camera's AC adapter back into your camera.[[Image:Unplug.png]]
#Plug your camera's AC adapter back into your camera.
 
 
#Allow a few minutes for the camera to fully reboot. [[Image:Wait.png]]
 
#Allow a few minutes for the camera to fully reboot. [[Image:Wait.png]]
 
#You are now Wireless! [[Image:Wireless.png]]
 
#You are now Wireless! [[Image:Wireless.png]]

Revision as of 23:56, 27 April 2014

Quick Start Guide for XX51A XX52A and XX59A

Thank you for choosing AirSight as your IP WIFI Camera!

Bapplogo.png

This guide is designed to help you setup your camera and view wirelessly on your Apple or Android device.

  • Setup is simple and takes only minutes.


SET UP THE HARDWARE

You need to set up your camera using a network cable (wired) first before you attempt to use it wirelessly.


  1. Attach the Wi-Fi antenna to the camera. Antenna.JPG
  2. Plug the included power adapter into the camera and into an AC outlet for power. Plugin.png
  3. Plug one end of the network cable into the camera, and the other end into your router/switch. Network ctn.png


SET UP THE SOFTWARE (iOS and Android)


Appstoresearch.png



  1. Click the Addcampic.png "Add Camera" button
  2. Click "QRCode" Clickqr.png
  3. Allow the app to access your camera and scan the QR Code on the bottom of the camera Qrscan.png
  4. When prompted - the default password is 000000




GO WIRELESS

  1. While the camera is still plugged into the router click the Info.png button.
  2. Go to "Advanced Settings Advancedsettings1.jpg
  3. Select "WiFi Selectwifi1.jpg
  4. Choose your WiFi network from the list and input your password. Password.png
  5. Unplug camera from the network cable.
  6. Power Down and Reboot your camera by unplugging the camera's AC adapter. Wait a couple seconds, then plug your camera's AC adapter back into your camera.Unplug.png
  7. Allow a few minutes for the camera to fully reboot. Wait.png
  8. You are now Wireless! Wireless.png