Difference between revisions of "Newer WS467s and Preset Dim"

From X10Wiki
Redirect page
Jump to: navigation, search
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
==Question==
+
#REDIRECT [[Newer Wall Switches and Preset Dim]]
 
+
'''I bought a WS467 wall switch in 2007 or later and its manual does not seem to describe its behavior correctly. Do you have updated instructions? '''
+
 
+
==Answer==
+
 
+
WS467s manufactured in 2007 or later have [[SoftStart]] and Preset Dim features added. By default, tapping the switch on the WS467 will bring the switch on at full brightness. You can set the switch to come on at a dim level instead.
+
 
+
===Setting Preset Dim===
+
 
+
Tap the switch on the WS467 so it comes on at full brightness. Press and hold the switch; the light will dim. Release the switch at the desired level. Tapping the switch will now alternate between off and dimmed.
+
 
+
===Clearing Preset Dim===
+
 
+
If the light is off, tap the switch once so it is on but dimmed. Press and hold the switch for 5 seconds; the light will dim further until it is almost off. Release the switch, then press and hold it for five more seconds; the light should come on at full brightness.
+
 
+
===Controlling From Active Home Pro===
+
 
+
Call your WS467 wall switches LM15A Two-Way Lamp Modules for best control results in ActiveHome Pro.
+

Latest revision as of 21:44, 17 September 2008