PLM01/PLM03

From X10Wiki
Revision as of 21:26, 8 April 2009 by Ericb (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

PLM01/PLM03

MODULE, LAMP

Thumb lm465.jpg

SPECIFICATIONS

Owner's Manual
http://x10pro.com/pro/pdf/plm01.plm03.pdf
Weight
0.28 lbs.
Power Supply
120VAC @ 60Hz
Maximum Load
300W incandescent
Minimum Load
40W
PLM01 The AGC Lamp Module incorporates an advanced X10 Powerline circuit design which allows the Module to operate in adverse environments. The principal advantage is better noise rejection. These Modules are recommended for all installations where reliability of operation is paramount.
PLM03 The NON-AGC Lamp Module principal advantage is greater sensitivity to the X10 Command Signal in an installation where electronic interference is low.
Suggestion
Always keep one of each Module in your supply, as one may perform better than the other based on the installations ability to

propagate the X10 Command versus electronic noise interference.

More information