Difference between revisions of "PR511 Floodlights Do Not Turn Off"

Latest revision as of 19:45, 19 June 2007

Redirect to:

@@ Line 1: / Line 1: @@
-==Question==
+#REDIRECT [[PR511 Does Not Turn Off]]
-'''I can't turn off the lights on my Motion Monitor. What should I do?'''
-==Answer==
-If turned on by a command from an X10 Controller, the Motion Monitor stays on until turned off from an X10 Controller. If necessary, send an Off command
-to the Motion Monitor from an X10 controller, returning the Motion Monitor to
-normal cycling mode.
-Also, if the Motion Monitor is accidentally powered off (from a wall switch that
-controls the power to it) while the floodlights are on, it will stay on when the power is
-reapplied. After dark, (depending on the position of the dusk setting) trigger the
-Motion Monitor by walking in front of it, then after the delay time you’ve set the
-floodlights will turn off and return to normal operation. ===Related Articles===
-[[Category:troubleshooting]]
-[[Category:frequently asked questions]]