Difference between revisions of "Pop The Rocker Panel Off With A Screwdriver"

From X10Wiki
Jump to navigation Jump to search
Line 5: Line 5:
 
==Answer==
 
==Answer==
  
Pop the rocker paddle off the X10 Decorator Switch using a flathead screwdriver; there is a small gap at the bottom of the rocker paddle. Set the House Code dial to the same letter (A thru P) that you set on your X10 controller(s). Set the Unit Code dial to an unused code (1 - 16) which can be controlled from any X10 controller. Replace the paddle.
+
Pop the rocker paddle off the X10 Decorator Switch using a flathead screwdriver; there is a small gap at the bottom of the rocker paddle.
 +
 
 +
*Set the House Code dial to the same letter (A thru P) that you set on your X10 controller(s).
 +
 
 +
*Set the Unit Code dial to an unused code (1 - 16) which can be controlled from any X10 controller. Replace the paddle.
 +
 
 +
 
  
 
[[Category:Configuration]]
 
[[Category:Configuration]]

Revision as of 21:55, 28 May 2014

Question

How do I set the house and unit code on my Decorator-style wall switch?

Answer

Pop the rocker paddle off the X10 Decorator Switch using a flathead screwdriver; there is a small gap at the bottom of the rocker paddle.

  • Set the House Code dial to the same letter (A thru P) that you set on your X10 controller(s).
  • Set the Unit Code dial to an unused code (1 - 16) which can be controlled from any X10 controller. Replace the paddle.