Pop The Rocker Panel Off With A Screwdriver

From X10Wiki
Revision as of 21:55, 28 May 2014 by X10douglas (talk | contribs)
Jump to navigation Jump to search

Question

How do I set the house and unit code on my Decorator-style wall switch?

Answer

Pop the rocker paddle off the X10 Decorator Switch using a flathead screwdriver; there is a small gap at the bottom of the rocker paddle.

  • Set the House Code dial to the same letter (A thru P) that you set on your X10 controller(s).
  • Set the Unit Code dial to an unused code (1 - 16) which can be controlled from any X10 controller. Replace the paddle.