Pop The Rocker Panel Off With A Screwdriver

From X10Wiki
Revision as of 22:17, 14 February 2007 by Ericb (talk | contribs) (→‎Question)
Jump to navigation Jump to search

Question

How do I set the house and unit code on my Decorator-style wall switch?

Answer

Pop the rocker paddle off the WS12A using a small screwdriver; there is a small gap at the bottom of the rocker paddle. Set the House Code dial to the same letter (A thru P) that you set on your X10 controller(s). Set the Unit Code dial to an unused code (1 - 16) which can be controlled from any X10 controller. Replace the paddle.