Pop The Rocker Panel Off With A Screwdriver

From X10Wiki
Revision as of 00:45, 17 February 2015 by X10douglas (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


How do I set the house and unit code on my Decorator-style wall switch?


  • Remove the faceplate


  • Pop the rocker paddle off the X10 Decorator Switch using a flathead screwdriver; there is a small gap at the bottom of the rocker paddle.



  • Set the House Code dial to the same letter (A thru P) that you set on your X10 controller(s).
  • Set the Unit Code dial to an unused code (1 - 16) which can be controlled from any X10 controller.
  • Replace the paddle.