Powerflash

From X10Wiki
Revision as of 01:05, 3 June 2010 by Ericb (Talk | contribs)

Jump to: navigation, search

pf284_blue.GIF

Pf284.jpg

Model: PF284

The PSC01 Powerflash Module is different from most other X10 modules - it sends X10 codes rather than receiving them. It can be triggered by a dry contact closure or a low voltage input (6-18 volts AC, DC, or audio). When connected to the output of a burglar alarm system or alarm panel, it can flood your house with light when the alarm is tripped. This device can be activated by a magnetic window switch, photo cell, moisture sensor, motion detector, pressure switch or anything that gives a switch closure. Applications for this versatile interface are limited only by your imagination. It can trip lights directly or activate sophisticated macros in ActiveHome Pro.

Product Pages

Purchase

Forums

Questions

How do I set up my Powerflash module?

Specifications

Weight
0.32 lbs.
Power Supply
120VAC @ 60Hz
Power
2W
Terminal Voltage
1V min, 18V max
Input Switch Position A
1 - 18VDC
Input Switch Position B
Dry Contact Closure

Related Products

ActiveHome Pro

Appliance Modules

Wall Switch Modules

Security Systems