Remote Control Fails To Control Vanguard Camera

From X10Wiki
Revision as of 22:15, 16 March 2006 by X10admin (Talk | contribs)

Jump to: navigation, search

Questions Why won't the remote control my camera? Answer

  • Press the C1 button to initialize the remote. Try moving the camera or zooming to see if this fixed the problem.
  • Check the batteries. If the C1 button does not light up when you press it, the batteries may have been inserted incorrectly, or they could be dead. Take the batteries out and put them back in according to the diagram inside the remote. If the remote still does not control your camera, try new batteries.

Related Articles [img src="http://site.x10.com/?Z3gxT2tiYXNlYXJ0aWNsZTEuZGF0=RND%7Ckbasearticle"]