Rotate the Camera Head

From X10Wiki
Revision as of 21:39, 11 November 2009 by Ericb (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Question

How do I

Answer

The camera head on the XCam2 (also the NightWatch and WideEye) will rotate half a turn- 180 degrees. There is a small bit of wire that connects the camera head to the camera body. If you rotate the camera head so that the bit of wire is at the underside of the head, near the ground, the picture will be right side up. Here is an example:

Thumb xc19a.jpg

The camera head is on the right side; you can see the wire coming out of the camera head and going into a little clip on the camera arm. Since the bit of wire coming out of the camera head is on the ground side, the picture will be right side up.