SS13A

From X10Wiki
Revision as of 21:48, 1 May 2014 by X10douglas (talk | contribs)
Jump to navigation Jump to search

X10 SS13A and PRO PHW04D: SlimLine Wireless Wall Switch Transmitter

File:Example.jpg

Error creating thumbnail: /bin/bash: /usr/bin/convert: No such file or directory Error code: 127


Product Pages


Specifications

Weight
0.2 lbs.
FCC ID
B4SSS13A
Power Supply
(1) CR2032, 3V lithium battery


Programming Instructions

  • To change the Housecode
  • Press and hold the first (top) ON rocker key. The red LED blinks once. 3 seconds later, the LED blinks the current setting: 1 blink for Housecode A, 2 blinks for B..... 16 blinks for P.
  • Release the first (top) ON rocker key.
  • Press and release the first (top) ON rocker key the appropriate number of times for the House Code you want to set. Once for A, twice for B, etc. The LED blinks for each press.
  • Hold the button on your last press. 3 seconds later, the red LED blinks back the new setting, e.g. 3 blinks for Housecode C. If you do not follow this programming sequence, the LED will stay on for 1 second and your existing setting will not be changed.


  • To change the Unit Code
  • The second and third rockers are always one # higher than the first. For example, if you set the first rocker key to 6, the second rocker key controls 7, and the third controls 8.
  • Press and hold the top OFF rocker key . The red LED blinks once. 3 seconds later, the LED blinks the current setting: 1 blink for Unit Code 1, 2 blinks for 2, 16 blinks for 16.
  • Release the top OFF rocker key.
  • Press and release the top OFF rocker key the appropriate number of times for the Unit Code you want. IMPORTANT: Hold the key on your last press. 3 seconds later the new code blinks back. If you do not follow this programming sequence, the LED will stay on for 1 second and your existing setting will not be changed.