Security Systems With The iconRemote RF

From X10Wiki
Revision as of 18:50, 29 May 2014 by X10douglas (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Question

How can I use the IconRemote to control my X10 security console?

Answer

Use your iconRemote RF to control your X10 Home Security System (DS7000, PA5800, DS8700, PA9200, PK9000 or PRO2000 models)! Arm the system in Home or Away Mode, arm it with a 60-second delay or hit the panic button to instantly set off the alarm. Simply enter in a 4-digit password to disarm. You can even control security lights with a click!

1. Press Home, then press Setup. Press X10 then press Add/Edit.

IR32A Security Setup Step 1.gif


2. Choose a room, for example, press Kitchen. Press OK.

IR32A Security Setup Step 2.gif


3. Press Address and choose your X10 House and Unit Code to match codes on your security console. Press Save.

IR32A Security Setup Step 3.gif


4. Press Pick Device. Press Security. Select your type of X10 Security System.

IR32A Security Setup Step 4.gif


5. Set password to arm/disarm. Set Console Link, then press Done.

IR32A Security Setup Step 5.gif


6. Select Logo the same way. Now press Done and you're ready to control your existing X10 Security System with your iconRemote RF!

IR32A Security Setup Step 6.gif