Sentinel Zoom Camera Setup

From X10Wiki
Revision as of 20:12, 6 July 2006 by Ericb (Talk | contribs)

Jump to: navigation, search

Introduction

This guide should help you get started quickly with the X10 Sentinel Zoom Camera

Setup

van_2.jpg

Connect the camera to its power supply and plug it into a wall outlet.

van_3.jpg

Put 4 AAA batteries (not included) into the remote control.

3_receiver_power.jpg

Connect the wireless video receiver to power and plug it into a wall outlet.

4_receiver_videoin.jpg

Connect the video receiver to your TV.

5_receiver_on.jpg

Turn the video receiver on and flip up the antenna. Point the antenna toward the camera.

6_video_select.jpg

Select your TV's video input (or try channel 0 and then Channel Down). The camera's image should appear.

Related Articles

Problems Opening Remote Viewer

Key Topics: gate, x10, com, remote, internet, viewer, client, server, site, sentinel

Relates to: VK79A, XC21A, XC21B, CR15A, SW26A, VA11A, CM19A

Troubleshooting Picture Quality on PC

Key Topics: quality, picture, video

Relates to: VK79A, XC21A, XC21B, CR15A

Camera Video Display Problems on TV

Key Topics: video, camera, xcam2, picture, tv, display, image, channel, input

Relates to: VK79A, XC21A, XC21B, CR15A

Troubleshooting Picture Quality on TV

Key Topics: quality, picture, video

Relates to: VK79A, XC21A, XC21B, CR15A

Remote Control Doesn't Control Vanguard Camera

Key Topics: focus, iris, c1, c2, c4, c3, cr15a

Relates to: VK79A, XC21A, XC21B, CR15A

Vanguard Camera Won't Focus

Key Topics: focus, auto, cap

Relates to: VK79A, XC21A, XC21B, CR15A

Remove Camera Text from Video Display

Key Topics: text, name, camera, id, display

Relates to: VK79A, XC21A, XC21B, CR15A