Difference between revisions of "Setting ActiveEye For Night Only"

From X10Wiki
Jump to navigation Jump to search
 
(2 intermediate revisions by the same user not shown)
Line 7: Line 7:
 
To set whether you want the ActiveEYE to transmit EVERY time it sees motion or only at night; and to enable or disable the “Unit Code +1” function to turn lights on/off at dusk/dawn:  
 
To set whether you want the ActiveEYE to transmit EVERY time it sees motion or only at night; and to enable or disable the “Unit Code +1” function to turn lights on/off at dusk/dawn:  
  
Press the Unit/Off button once. The red light flashes. Then, (within 3 seconds) press and hold the House/On button. The green light turns on. 3 seconds later the ActiveEYE reports its dusk/dawn setting as follows:
+
Press the Unit/Off button once.
 +
 
 +
The red light flashes.
 +
 
 +
Then, (within 3 seconds) press and hold the House/On button.
 +
 
 +
The green light turns on.
 +
 
 +
3 seconds later the ActiveEYE reports its dusk/dawn setting as follows:
  
 
*The red light blinks '''once''' if the ActiveEYE is set to detect motion at all times and does not turn Unit Code +1 ON at dusk and OFF at dawn.
 
*The red light blinks '''once''' if the ActiveEYE is set to detect motion at all times and does not turn Unit Code +1 ON at dusk and OFF at dawn.
Line 14: Line 22:
 
*The red light blinks '''four''' times if the ActiveEYE is set to detect motion only when it’s dark and does turn Unit Code +1 ON at dusk and OFF at dawn.
 
*The red light blinks '''four''' times if the ActiveEYE is set to detect motion only when it’s dark and does turn Unit Code +1 ON at dusk and OFF at dawn.
  
To change this, Press the Unit/Off button once. The red light flashes. Then, (within 3 seconds) press and hold the House/On button. The green light turns on. 3 seconds later the ActiveEYE reports its dusk/dawn setting, as listed above. Release and immediately press the House/On button 1, 2, 3, or 4 times for the setting you require, as above.
 
  
Hold the button for 3 seconds on your last press. The red light then reports the setting with 1, 2, 3, or 4 blinks.
+
 
 +
To change this, Press the Unit/Off button once.
 +
 
 +
The red light flashes.
 +
 
 +
Then, (within 3 seconds) press and hold the House/On button.
 +
 
 +
The green light turns on.
 +
 
 +
3 seconds later the ActiveEYE reports its dusk/dawn setting, as listed above.
 +
 
 +
Release and immediately press the House/On button 1, 2, 3, or 4 times for the setting you require, as above.
 +
 
 +
Hold the button for 3 seconds on your last press.
 +
 
 +
The red light then reports the setting with 1, 2, 3, or 4 blinks.
 +
 
 +
 
 +
==Related Articles==
 +
 
 +
[[Setting EagleEye For Night Only]]

Latest revision as of 19:34, 29 May 2014

Question

How do I set the ActiveEye to only work at night?

Answer

To set whether you want the ActiveEYE to transmit EVERY time it sees motion or only at night; and to enable or disable the “Unit Code +1” function to turn lights on/off at dusk/dawn:

Press the Unit/Off button once.

The red light flashes.

Then, (within 3 seconds) press and hold the House/On button.

The green light turns on.

3 seconds later the ActiveEYE reports its dusk/dawn setting as follows:

  • The red light blinks once if the ActiveEYE is set to detect motion at all times and does not turn Unit Code +1 ON at dusk and OFF at dawn.
  • The red light blinks twice if the ActiveEYE is set to detect motion only when it’s dark and does not turn Unit Code +1 ON at dusk and OFF at dawn.
  • The red light blinks three times if the ActiveEYE is set to detect motion at all times and does turn Unit Code +1 ON at dusk and OFF at dawn.
  • The red light blinks four times if the ActiveEYE is set to detect motion only when it’s dark and does turn Unit Code +1 ON at dusk and OFF at dawn.


To change this, Press the Unit/Off button once.

The red light flashes.

Then, (within 3 seconds) press and hold the House/On button.

The green light turns on.

3 seconds later the ActiveEYE reports its dusk/dawn setting, as listed above.

Release and immediately press the House/On button 1, 2, 3, or 4 times for the setting you require, as above.

Hold the button for 3 seconds on your last press.

The red light then reports the setting with 1, 2, 3, or 4 blinks.


Related Articles

Setting EagleEye For Night Only